Abstract:In this study, the interfacial properties of biosurfactant rhamnolipid were investigated and were applied to remove adsorbed heavy metal ions from sand surfaces with flushing operations. The surface tension-lowering activity, micelle charge characteristic, and foaming ability of rhamnolipid were identified first. For rhamnolipid in water, the negatively charged characteristic of micelles or aggregates was confirmed and the foaming ability at concentrations higher than 40 mg/L was evaluated. By using the rhamnolipid solutions in a batch washing approach, the potential of applying the interfacial properties of rhamnolipid to remove adsorbed copper ions from sand surfaces was then demonstrated. In rhamnolipid solution flushing operations for sand-packed medium, higher efficiency was found for the removal of adsorbed copper ions with residual type than with inner-sphere interaction type, implying the important role of interaction type between the copper ion and the sand surface in the removal efficiency. In addition, the channeling effect of rhamnolipid solution flow in the sand-packed medium was clearly observed in the solution flushing operations and was responsible for the low removal efficiency with low contact areas between solution and sand. By using rhamnolipid solution with foam to flush the sand-packed medium, one could find that the channeling effect of the solution flow was reduced and became less pronounced with the increase in the rhamnolipid concentration, or with the enhanced foaming ability. With the reduced channeling effect in the flushing operations, the removal efficiency for adsorbed copper ions was significantly improved. The results suggested that the foam-enhanced rhamnolipid solution flushing operation was efficient in terms of surfactant usage and operation time.

Removal of heavy metal ions from water using ion flotation

Ion flotation removal of a range of contaminant ions from drinking water

Removal of hazardous ions from aqueous solutions: Current methods, with a focus on green ion flotation

Polyaluminum Chloride-Functionalized Colloidal Gas Aphrons for Flotation Separation of Nanoparticles from Water.

Efficient removal of heavy metals from aqueous solutions using ion flotation technique

Removal of Cadmium(II) from Aqueous Solution by Ion Flotation Using Rhamnolipid Biosurfactant As an Ion Collector

Removal of Nickel and Cadmium Ions from Wastewater by Sorptive Flotation: Single and Binary systems

Ion flotation of heavy metal ions by using biodegradable biosurfactant as collector: Application and removal mechanism

Ion flotation for heavy metal removal with biosurfactant sodium lauroyl methyl isethionate: Operational parameters and removal mechanism

Removal of cadmium (II) from simulated wastewater by ion flotation technique

Heavy metal removal from waste waters by ion flotation

Facile adsorption-electroflotation method for the removal of heavy metal ions from water using carbon nanomaterials

Cloud point extraction of heavy metal ions for wastewater remediation: an equilibrium and kinetic study

REMOVAL OF COPPER ION FROM WASTEWATER BY FLOTATION

Removing adsorbed heavy metal ions from sand surfaces via applying interfacial properties of rhamnolipid

Toxic heavy metal ions removal from wastewater by ion flotation using a nano collector

An ultralight and flexible nanofibrillated cellulose/chitosan aerogel for efficient chromium removal: Adsorption-reduction process and mechanism

Synthesis and application of a green surfactant for the treatment of water containing PFAS/ hazardous metal ions

Cationic Surfactant-Mediated Coagulation for Enhanced Removal of Toxic Metal-Organic Complexes: Performance, Mechanism, and Validation

Removal of copper (II) from aqueous solutions by flotation using polyaluminum chloride silicate (PAX-XL60 S) as coagulant and carbonate ion as activator