Abstract:In this study, we explored the effective capture of both cations and anions onto a single adsorbent. Acrylamide (AAm) served as the polymer backbone, onto which co-monomers sodium p-styrenesulfonate (SS) and N,N-dimethylaminopropyl acrylamide (DMAPAA) were grafted, creating ionized polymer hydrogel adsorbents. These adsorbents were engineered for the synergistic separation and recovery of heavy metal cations and anions from concentrated solutions, focusing specifically on industrially significant ions such as Ni2+-, Cu2+, Zn2+ and (Cr2O7)2-. The adsorption and desorption behaviors of the AAm terpolymer hydrogels were investigated across various pH solutions, considering the competition and concentrations of these specific metal ions. Moreover, the study delved into the effects of the internal pH environment within the hydrogel adsorbents, determining its impact on the type of metal adsorbed and the adsorption capacity. Our findings indicated that the adsorption of cations was enhanced with a higher proportion of SS relative to DMAPAA in the hydrogel. In contrast, significant anion capture occurred when the concentration of DMAPAA exceeded that of SS. However, equal ratios of SS and DMAPAA led to a noticeable reduction in the adsorption of both types of substrates, attributed to the counteractive nature of these co-monomers. To enhance the adsorption efficiency, it may be necessary to consider methods for micro-scale separation of the two types of monomers. Additionally, the adsorption capacity was observed to be directly proportional to the swelling capacity of the hydrogels. For complete desorption and separation of the cations and anions from the adsorbent, the application of concentrated NaOH solutions followed by HNO3 was found to be essential. Given the varying concentrations of cation and anion pollutants, often present in heavy metal factory effluents, it is crucial to fine-tune the ratios of DMAPAA and SS during the synthesis process. This adjustment ensures optimized efficiency in the decontamination and recovery of these significant heavy metal ions.

Highly efficient poly(6-acryloylamino-N-hydroxyhexanamide) resin for adsorption of heavy metal ions

High-efficiency adsorption removal for Cu(II) and Ni(II) using a novel acylamino dihydroxamic acid chelating resin

Preparation of 6-Amino-N-Hydroxyhexanamide-Modified Porous Chelating Resin for Adsorption of Heavy Metal Ions

A Novel Polyvinyltetrazole-Grafted Resin with High Capacity for Adsorption of Pb(Ii), Cu(Ii) and Cr(Iii) Ions from Aqueous Solutions

Removal of heavy metal ions from wastewater by a novel HEA/AMPS copolymer hydrogel: preparation, characterization, and mechanism

Selective Removal of Cu2+ Ion in Aqueous Solution by Poly (acrylic Acid/Acrylamide) Hydrogel

Synthesis of F127/PAA Hydrogels for Removal of Heavy Metal Ions from Organic Wastewater.

High crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin for heavy metal adsorption: its characteristics and mechanisms

Aminopoly(carboxylic Acid)-Functionalized PolyHIPE Beads Toward Eliminating Trace Heavy Metal Ions from Water

Highly efficient and selective capture of heavy metals by poly(acrylic acid) grafted chitosan and biochar composite for wastewater treatment

A high‐efficiency adsorbent resin treated by nanosecond pulsed discharge for the removal of trace heavy metal ions in water

Simultaneous Adsorption of Multi-Heavy Metal Ions from Wastewater via Grafted Phosphate Functionality on Polyvinyl Alcohol

Preparation of Dual-Function Chelating Resin with High Capacity and Adjustable Adsorption Selectivity to Variety of Heavy Metal Ions

Highly Nanostructured and Carboxylated Wood Aerogel-Based Adsorption Membrane Reconstructed by Grafting of Polyacrylic Acid for Efficient Removal of Heavy-Metal Ions

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

High-capacity Polyvinyltetrazole-grafted Chelating Resin for Adsorption of Heavy Metal Ions

Green Synthesis of Reusable Adsorbents for the Removal of Heavy Metal Ions

Ionized acrylamide-based copolymer / terpolymer hydrogels for recovery of positive and negative heavy metal ions

Simultaneous removal of Pb2+, Cu2+ and Cd2+ ions from wastewater using hierarchical porous polyacrylic acid grafted with lignin.

Heavy metals removal using hydrogel-supported nanosized hydrous ferric oxide: Synthesis, characterization, and mechanism

Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions