Abstract:Heavy metal pollution is directly related to human health and life safety, and the development of broad-spectrum and high-efficiency heavy metal adsorbents is expected to solve the problem of coexistence of multiple heavy metal pollutants in industrial wastewater. A triptycene-based porous organic polymer (TPOP) with high specific surface area was produced by crosslinking three-dimensional rigid triptycene monomer through the simple Friedel-Crafts alkylation reaction. Then, a broad-spectrum heavy metal ions adsorption active site (TPOP-CH(2)EDTA) was constructed in TPOP by grafting of ethylenediamine and sodium chloroacetate. The obtained TPOP-CH(2)EDTA showed a micro/mesoporous structure, with the main micropore size of 1.6 nm and the BET surface area of 634 m(2)/g, which facilitates the transfer and coordination of heavy metal ions. TPOP-CH(2)EDTA has a broad-spectrum adsorption for heavy metal ions, like Ag(I), Cu(II), Ni(II), Zn(II), Co(II), Sn(IV), Pb(II), Cd(II), Fe(III), Cr(III) are investigated, respectively, and the removal efficiency are all higher than 98%. Taking Pb(II) as a typical heavy metal pollutant, the maximum adsorption capacity of Pb(II) is calculated up to 184.5 mg/g by the Langmuir model. The kinetic study shows that it is a Pseudosecond-order adsorption, fast adsorption rate, and the kinetic constant k(2) of 0.0173 g.mg(-1).min(-1). After 5 recycling use, the removal efficiency of Pb(II) is still as high as 95.8%. More significantly, the removal efficiency of Pb(II) and Cu(II) in their mixture solution is either higher than 99%. For the complex real water containing large amounts of inorganic salts, like Ca(II), Mg(II), K(I), Na(I) ions, and organic compounds, the removal efficiency of Pb(II) and Cu(II) still maintains higher than 90%. Therefore, a broad-spectrum heavy metal ion adsorption active site is constructed by controlling the microstructure of porous organic polymers (such as specific surface area, pore size and adsorption site density), which provides a scheme for the coordinated removal of mixed heavy metal ions in complex water systems.

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water

Aminopoly(carboxylic Acid)-Functionalized PolyHIPE Beads Toward Eliminating Trace Heavy Metal Ions from Water

Hypercrosslinked microporous polymer networks for effective removal of toxic metal ions from water

Highly Efficient Extraction of Lead Ions from Smelting Wastewater, Slag and Contaminated Soil by Two-Dimensional Montmorillonite-Based Surface Ion Imprinted Polymer Absorbent.

Construction of Active Sites in Porous Organic Polymers for Various Heavy Metal Ions Capture

Preparation of Ion-Imprinted Amino-Functionalized Nano-Porous Silica for Selective Removal of Heavy Metal Ions from Water Environment

Highly Efficient and Selective Removal of Lead Ions from Aqueous Solutions by Conjugated Microporous Polymers with Functionalized Heterogeneous Pores

MOF-based Ca-alginate/PAA granulate beads for efficient heavy metal removal from water: Synthesis, performance, and mechanism

Stimuli-responsive Adsorption Behavior Toward Heavy Metal Ions Based on Comb Polymer Functionalized Magnetic Nanoparticles

Facile Synthesis of Poly-Dithiocarbamate for Efficient Removal of Heavy Metals from Wastewater

A Mesoporous Poly-Melamine-Formaldehyde Polymer As A Solid Sorbent For Toxic Metal Removal

Highly efficient poly(6-acryloylamino-N-hydroxyhexanamide) resin for adsorption of heavy metal ions

Porous Poly(Ionic Liquid) Membranes As Efficient and Recyclable Absorbents for Heavy Metal Ions

Highly Efficient Removal of Heavy Metal Ions by Amine-Functionalized Mesoporous Fe3O4 Nanoparticles

Polyacrylic acid functionalized superparamagnetic iron-oxide supraparticles for highly efficient adsorption and removal of contaminants from water

Radix Astragali residue-derived porous amino-laced double-network hydrogel for efficient Pb(II) removal: Performance and modeling

A multifunctional adsorbent based on 2,3-dimercaptosuccinic acid/dopamine-modified magnetic iron oxide nanoparticles for the removal of heavy-metal ions

Functionalized Metal-Organic Framework UIO-66 Nanocomposites with Ultra-High Stability for Efficient Adsorption of Heavy Metals: Kinetics, Thermodynamics, and Isothermal Adsorption

Porphyrin-Based Conjugated Microporous Polymers for Highly Efficient Adsorption of Metal Ions

Synergistic DFT-guided Design and Microfluidic Synthesis of High-Performance Ion-Imprinted Biosorbents for Selective Heavy Metal Removal

Efficiently selective removal of Pb(II) by magnetic ion-imprinted membrane based on polyacrylonitrile electro-spun nanofibers