Abstract:A series of multi-amine functionalized polymeric adsorbents with polymethacrylate-divinylbenzene as the substrate were facilely prepared for the enhanced removal and selective recovery of Cu(II) and Ni(II) from saline solutions. The optimal experiment of suspension polymerization between divinylbenzene and methylacrylate was designed by response surface methodology. The multi-amine was successfully grafted on polymethacrylate-divinylbenzene beads as evidenced by N-H deformation vibrations in Fourier-transform infrared spectrometry and characteristic absorption peaks of nitrogen in X-ray photoelectron spectroscopy. Among the newly-synthesized multi-amine adsorbents, the tetraethylenepentamine decorated resin (PAMD) exhibited the highest content of N, reaching as high as 20.38%. The maximum adsorption capacity of PAMD for Cu(II) was up to 1.21 mmol g(-1), which is obviously superior to such commercial multi-amine resins as Purolite S984. With increasing concentration of NaNO3 in the solutions, the uptake of Cu(II) and Ni(II) onto PAMD was significantly enhanced by up to 74.28% and 75.51%, respectively. It is noteworthy that the separation factor towards Cu(II) became infinite with the help of NaNO3 despite the moderate one (1160.19) in a Cu(II)/Ni(II) salt-free solution, and such interesting characteristics could be potentially applied to prepare high-purity nickel. The salt-promotion effect of PAMD was expressed by the promotion index (K-p). Furthermore, based on the model of a compressed electric double layer, the quantitative simulation of salt-enhanced adsorption was illuminated for the first time. PAMD has also been successfully applied to treat the actual saline effluent, and a greater volume of wastewater can be decontaminated by PAMD (330 BV) compared with S984 (220 BV) under the same conditions. These interesting findings suggest that PAMD could be satisfactorily applied in the advanced treatment of actual saline effluents with low-cost, high-efficiency and good-reproducibility.

Enhanced Removal of Cu(II) and Ni(II) from Saline Solution by Novel Dual-Primary-amine Chelating Resin Based on Anion-Synergism.

Enhancement Mechanisms Behind Exclusive Removal and Selective Recovery of Copper from Salt Solutions with an Aminothiazole-Functionalized Adsorbent

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

EFFECTIVE REMOVAL OF HEAVY METAL IONS FROM HYPERSALINE WASTEWATER BY AMINOACETIC CHELATING RESIN

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Highly Efficient Removal of Cu(ii) by Novel Dendritic Polyamine–pyridine-Grafted Chitosan Beads from Complicated Salty and Acidic Wastewaters

Displacement mechanism of binary competitive adsorption for aqueous divalent metal ions onto a novel IDA-chelating resin: isotherm and kinetic modeling.

Nitrogen-doped Chitosan-Fe(iii) Composite As a Dual-Functional Material for Synergistically Enhanced Co-Removal of Cu(II) and Cr(VI) Based on Adsorption and Redox

Adsorption Performances and Mechanisms of the Newly Synthesized N,N '-Di (carboxymethyl) Dithiocarbamate Chelating Resin Toward Divalent Heavy Metal Ions from Aqueous Media

Insight into Highly Efficient Coremoval of Copper and P-Nitrophenol by A Newly Synthesized Polyamine Chelating Resin from Aqueous Media: Competition and Enhancement Effect Upon Site Recognition

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Highly Selective Removal of Ni(II) from Plating Rinsing Wastewaters Containing [Ni-Xnh3-yp2o7]n Complexes Using N-chelating Resins.

High-efficiency adsorption removal for Cu(II) and Ni(II) using a novel acylamino dihydroxamic acid chelating resin

Preparation of a Novel Poly-chloromethyl Styrene Chelating Resin Containing Heterofluorenone Pendant Groups for the Removal of Cu (II), Pb (II), and Ni (II) from Wastewaters

Multifold Enhanced Synergistic Removal of Nickel and Phosphate by a (N,fe)-Dual-functional Bio-Sorbent: Mechanism and Application.

Efficient Removal of Hg(II) by Polymer-Supported Hydrated Metal Oxides from Aqueous Solution

Amidoxime-functionalized polyacrylamide-modified chitosan containing imidazoline groups for effective removal of Cu2+ and Ni2+

An Integrative Technique Based on Synergistic Coremoval and Sequential Recovery of Copper and Tetracycline with Dual-Functional Chelating Resin: Roles of Amine and Carboxyl Groups

High-efficient Technique to Simultaneous Removal of Cu(II), Ni(II) and Tannic Acid with Magnetic Resins: Complex Mechanism Behind Integrative Application

Enhanced Removal of Edta-Chelated Cu(Ii) by Polymeric Anion-Exchanger Supported Nanoscale Zero-Valent Iron