Abstract:domIn this study, the radiation dose effect of γ rays on the temperature-dependent mechanical behaviors of poly methyl-vinyl silicone rubber foams is investigated by uniaxial compression tests. After exposure to a wide radiation dose range from 0 to 500 kGy at room temperature, silicone rubber foams were tested at 10, 40, 70, and 100 °C. The test results show that temperature increase causes linear hardening for both unirradiated and irradiated samples due to the predominating entropy-related deformation of silicone rubber matrix. Moreover, increase of irradiation dose leads to linear hardening as a result of dominating cross-linking reactions of rubber networks. A stress hardening factor is introduced to characterize the effect of irradiation dose on temperature-related hardening behavior, which is defined as the ratio between the compressive stresses of irradiated and unirradiated samples for a given compression strain. The approximated constant stress hardening factor for each radiation dose condition implies that the irradiation dose does not affect the temperature-related hardening behavior. Based on the test findings, the Ogden Hyperfoam model was extended by correlating the initial shear modulus-related model parameters with radiation dose and temperature. The hardening exponent-related model parameters have been shown to be independent of radiation dose and temperature, and the Poisson's ratio-related model parameters are approximated to zero for the high porosity of the material. The prediction performance of the extended model is demonstrated by comparing the fitted model responses with test data over the studied irradiation doses and temperature range. The results are expected to be helpful for the safety evaluation of nuclear engineering structures.

The Foaming Property of Linear Polypropylene Under Irradiation

Structure and Properties of Radiation Cross-Linked Polypropylene Foam

LIMITED-OXYGEN IRRADIATION CROSSLINKING MODIFICATION OF HDPE

Radiation Effects on Polyethylene and Polypropylene by Electrons and Protons

Proton Beam Modification of Isotactic Polypropylene

Tuning High and Low Temperature Foaming Behavior of Linear and Long-Chain Branched Polypropylene via Partial and Complete Melting

Electron-Beam-Induced Radiation Effects on Siloxane Foam

Investigation of extensional rheological behaviors of polypropylene for foaming

Structure and Properties of Closed‐cell Foam Prepared from Irradiation Crosslinked Silicone Rubber

Low-Density and High-Performance Fiber-Reinforced PP/POE Composite Foam via Irradiation Crosslinking

Stabilization of Polypropylene, Polypropylene Blends with Poly (Styrene-B-(ethylene-co-butylene)-b-styrene) under Irradiation: A Comparative Investigation

A Comparative Study of Gamma-Ray Irradiation-Induced Oxidation: Polyethylene, Poly (Vinylidene Fluoride), and Polytetrafluoroethylene

Radiation Stability of Perfluoroethylene-Propylene Copolymer

Influence of γ-irradiation on mechanical behaviors of poly methyl-vinyl silicone rubber foams at different temperatures

The Effect of Crystallization Characteristics on Foaming Behavior Polypropylene Materials

Foaming of Linear Isotactic Polypropylene Based on Its Non-Isothermal Crystallization Behaviors under Compressed Co2

Molecular and thermo-mechanical assessment of long-chain branched polypropylene: Effect of irradiation dose, multifunctional monomer content and molecular weight

Effects Of Processing Conditions On Foaming Behaviors Of Polyetherimide (Pei) And Pei/Polypropylene Blends In Microcellular Injection Molding Process

A study on properties and chemical structure of polyimide film irradiated with proton

Effect of Radiation on the Crosslinking and Branching of Polypropylene

Crystallization Behavior of Linear Polypropylene/Low-density Polyethylene Foaming Systems