Abstract:First, different PP foam samples were prepared by different core‐back distances of the mold in the injection molding machine above the picture, and they can be summarized into two categories: high cell density PP foam material (with a fine and dense cell structure) and low cell density PP foam material (with a large size distribution of uneven cell structure). Below the injection molding machine are the flame retardant mechanisms of the two foam materials, which can generate two different carbon layer structures through continuous burning. At the far right of the picture is the reason for the two different carbon layers, mainly due to the different degrees of gas escape from the PP foam materials during combustion. In previous studies, the effect of cell structures of polypropylene (PP) foam materials on flammability behavior had been largely overlooked. In this work, ammonium polyphosphate and pentaerythritol were used as intumescent flame retardants (IFR) for PP, and then the PP‐IFR flame retardant foams were prepared by using injection foaming technology with two different weight reduction methods (same mold volume before foaming and after foaming). The results showed that the average cell size of all the PP‐IFR flame retardant foams in the 10% to 30% weight reduction was less than 100 μm. The PP‐IFR flame retardant foams with an average cell diameter of 26.22 μm and cell density of 7.88 × 106 cells/cm3 had the best limiting oxygen index (LOI) of 27.9%. In addition, the PP‐IFR flame retardant foams with better foaming quality had a higher LOI and a denser foam carbon layer whatever the weight reduction methods, resulting in better flame retardant properties. The escape of gases from the foamed and un‐foamed areas not only reduced the concentration of flammable gases but also led to the collapse and rupture of the foam carbon layer during the combustion process. Hence, it provides guidance for preparing PP foam materials with excellent flame retardancy.

Halogen‐free Intumescent Flame Retardancy and Mechanical Properties of the Microcellular Polypropylene with Low Expansion Ratio Via Continuous Extrusion Assisted by Subcritical CO 2

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

A Novel Halogen‐free Intumescent Flame Retardant Containing Phosphorus and Nitrogen and Its Application in Polypropylene Systems

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

A new strategy for constructing polypropylene composite foams with excellent ablation resistance and flame retardancy

Effect of foaming behavior of polypropylene foams on flame retardant properties under different weight reduction methods

In Situ Nanofibrillar Polypropylene-Based Composite Microcellular Foams with Enhanced Mechanical and Flame-Retardant Performances

Low-Density and High-Performance Fiber-Reinforced PP/POE Composite Foam via Irradiation Crosslinking

Intumescent Flame-retardant Modification of Polypropylene/Carbon Fiber Composites

Halogen-Free Flame Retardant Polypropylene Fibers with Modified Intumescent Flame Retardant: Preparation, Characterization, Properties and Mode of Action

Influences of high‐impact polystyrene loading on the foaming behavior and flame‐retardant properties of polyphenylene oxide composites blown with CO 2

Study of A Halogen-Free Flame-Retarded Polypropylene Composition with Balanced Strength and Toughness

Mechanical, Dielectric and Flame-Retardant Properties of GF/PP Modified with Different Flame Retardants

Mechanical, Flame-Retardant and Dielectric Properties of Intumescent Flame Retardant/Glass Fiber-Reinforced Polypropylene through a Novel Dispersed Distribution Mode

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

Lightweight and strong polypropylene/talc/polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming

Flammability and Thermal Properties of a Novel Intumescent Flame Retardant Polypropylene

A novel highly efficient intumescent flame-retardant polypropylene: Thermal degradation, flame retardance and mechanism

Flame Retardant Properties and Mechanical Properties of Polypropylene with Halogen and Halogen-Free Flame Retardant System

Great enhancement of efficiency of intumescent flame retardants by titanate coupling agent and polysiloxane