Abstract:First, different PP foam samples were prepared by different core‐back distances of the mold in the injection molding machine above the picture, and they can be summarized into two categories: high cell density PP foam material (with a fine and dense cell structure) and low cell density PP foam material (with a large size distribution of uneven cell structure). Below the injection molding machine are the flame retardant mechanisms of the two foam materials, which can generate two different carbon layer structures through continuous burning. At the far right of the picture is the reason for the two different carbon layers, mainly due to the different degrees of gas escape from the PP foam materials during combustion. In previous studies, the effect of cell structures of polypropylene (PP) foam materials on flammability behavior had been largely overlooked. In this work, ammonium polyphosphate and pentaerythritol were used as intumescent flame retardants (IFR) for PP, and then the PP‐IFR flame retardant foams were prepared by using injection foaming technology with two different weight reduction methods (same mold volume before foaming and after foaming). The results showed that the average cell size of all the PP‐IFR flame retardant foams in the 10% to 30% weight reduction was less than 100 μm. The PP‐IFR flame retardant foams with an average cell diameter of 26.22 μm and cell density of 7.88 × 106 cells/cm3 had the best limiting oxygen index (LOI) of 27.9%. In addition, the PP‐IFR flame retardant foams with better foaming quality had a higher LOI and a denser foam carbon layer whatever the weight reduction methods, resulting in better flame retardant properties. The escape of gases from the foamed and un‐foamed areas not only reduced the concentration of flammable gases but also led to the collapse and rupture of the foam carbon layer during the combustion process. Hence, it provides guidance for preparing PP foam materials with excellent flame retardancy.

A new strategy for constructing polypropylene composite foams with excellent ablation resistance and flame retardancy

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

In Situ Nanofibrillar Polypropylene-Based Composite Microcellular Foams with Enhanced Mechanical and Flame-Retardant Performances

Synergistic fire retardant effect between expandable graphite and ferrocene-based non-phosphorus polymer on polypropylene

Facile fabrication of starch-based, synergistic intumescent and halogen-free flame retardant strategy with expandable graphite in enhancing the fire safety of polypropylene

The Multilayered Distribution of Intumescent Flame Retardants and Its Influence on the Fire and Mechanical Properties of Polypropylene

Effect of foaming behavior of polypropylene foams on flame retardant properties under different weight reduction methods

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen-free PP/IFR composite

Construction of hydrophobic core-shell flame retardant: A novel strategy towards reducing fire hazards and reinforcing mechanical properties of polypropylene

Halogen‐free Intumescent Flame Retardancy and Mechanical Properties of the Microcellular Polypropylene with Low Expansion Ratio Via Continuous Extrusion Assisted by Subcritical CO 2

Cage‐shaped octaphenyl silsesquioxane with micro‐nano dispersibility for strengthening intumescent flame retardancy in polypropylene composites

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

Thermal Degradation and Combustion Behavior of Novel Intumescent Flame Retardant Polypropylene with N-alkoxy Hindered Amine

Intumescent Flame-retardant Modification of Polypropylene/Carbon Fiber Composites

A novel highly efficient intumescent flame-retardant polypropylene: Thermal degradation, flame retardance and mechanism

Synthesis of A Novel Charring Agent Containing Pentaerythritol and Triazine Structure and Its Intumescent Flame Retardant Performance for Polypropylene

Rigid Polyurethane Foam Compounds with Excellent Fire Performance Modified by a Piperazine Pyrophosphate/expandable Graphite Synergistic System

Cyclotriphosphazene-Based Intumescent Flame Retardant Against the Combustible Polypropylene

Flame Retardant Synergy Between Interfacial and Bulk Carbonation in Glass Fiber Reinforced Polypropylene

Fabrication of hierarchical core-shell carbon microspheres@ layered double hydroxide@ polyphosphazene architecture in flame-retarding polypropylene

Preparation of Efficiently Intumescent-Flame-retarded Polypropylene Composite: Synergistic Effect of Novel Phosphorus-Containing Polyhedral Oligomeric Silsesquioxane