Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Application of Hyperelastic Constitutive Models in Finite Element Analysis on Tires

Research on simplified tire finite element modeling and simulation method

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Modeling Method of Constitutive Law of Rubber Hyperelasticity Based on Finite Element Simulations

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

CONSTITUTIVE PARAMETRIC EXPERIMENT OF TIRE RUBBER HYPERELASTIC LAWS WITH APPLICATION

Study on the Compressible Hyperelastic Constitutive Model of Tire Rubber Compounds under Moderate Finite Deformation

Application of Rebar Model in Finite Element Analysis of Tire

Mechanical properties of cord-rubber composites and tire finite element analysis

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

A new method for selecting and evaluating the hyperelastic model of tread rubber material under rolling contact condition

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Parameters Determination of Mooney-Rivlin Model for Rubber Material of Mechanical Elastic Wheel

Hyper-Pseudo-Viscoelastic Model and Parameter Identification for Describing Tensile Recovery Stress–Strain Responses of Rubber Components in TBR

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Test and Characterization for the Incompressible Hyperelastic Properties of Conditioned Rubbers under Moderate Finite Deformation

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

An embedded model of cord-reinforced rubber composites for aircraft tires

The Uniaxial Stress–Strain Relationship of Hyperelastic Material Models of Rubber Cracks in the Platens of Papermaking Machines Based on Nonlinear Strain and Stress Measurements with the Finite Element Method