Abstract:The low chromium ferritic stainless steel, 410S, as a candidate control rod drive mechanism (CRDM) material used in nuclear power plants, was subjected to accelerated thermal aging at 400 degrees C in air up to an exposure period of 10,000 h (similar to 417 days). A series of analytical techniques including optical microscope (OM), electron back scatter diffraction (EBSD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and 3D atom probe tomography (3D-APT) were used to characterize the evolution of the microstructure with thermal aging time, whilst a couple of tests (i.e., hardness, Charpy impact and tensile tests) were employed to link the changes of mechanical properties at different thermal aging times with the microstructure. After <= 3000 h thermal aging treatment, Cr-rich alpha' phase formed near the ferritic grain boundaries, leading to minor change in the hardness and strength of 410S but sharp decrease in impact energy. When the thermal aging time increased to 10,000 h, the formation of Cr-rich alpha' phase spread from near the ferritic grain boundary to the inside of ferritic grain and the growth of carbides precipitated led to the slight increase in the hardness and strength but the decrease in the impact energy and plasticity. Under these circumstances, the decrease of free substitutional atoms (i.e., Cr) caused by the formation of Cr-rich alpha' phase and the growth of carbides changed the dynamic strain aging type from type B to type A.

Evaluation of Thermal Aging Effect on Primary Pipe Material in Nuclear Power Plant by Micro Hardness Test Method

The Microstructure and Mechanical and Corrosion Behaviors of Thermally Aged Z3CN20-09M Cast Stainless Steel for Primary Coolant Pipes of Nuclear Power Plants

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Effect of Heat Treatment Process on Properties of ITER-grade CuCrZr Alloy

DSI-based Studies of the Effects of High-temperature Aging on Local Mechanical Properties of HR3C/T92 Dissimilar Steel Welded Joint

Thermal Aging Effect Of Cdss On The Integrity Of The Pwr Primary Pipe With Damage Tolerance Method

Application of Depth-Sensing Indentation Testing Technology in Studying the Mechanical Properties Change of Boiler Tubes

Study on performance degradation of main steam pipe of X20CrMoV12.1 steel for long-term service

Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications

Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel

EFFECT OF THERMAL AGING TREATMENT ON MICROSTRUCTURE EVOLUTION AND MECHANICAL PROPERTIES DEVELOPMENT IN A NI-CR-MO-V WELD METAL

Non-hardening Embrittlement Mechanism of Pressure Vessel Steel Ni-Cr-Mo-V Welds During Thermal Aging

Investigation of thermal aging damage mechanism of the Cast Duplex Stainless Steel

Experimental Investigation on Creep Behaviors and Life Prediction Across Phase-Transformation of Thermal Aged 16MND5 Steel

Microcosmic Mechanical Properties of Thermal Aged Cast Austenite Stainless Steel in Primary Circuit in Nuclear Plant

Microstructural Evolution of TP347H After Post Weld Heat Treatment and Aging

Residual Life Assessment of X20CrMoV12.1 Straight Main Steam Pipe in Service

Effect of Thermal Aging on the Microstructure and Mechanical Property of 410S Ferritic Stainless Steel

Localized Corrosion of Thermally Aged Cast Duplex Stainless Steel for Primary Coolant Pipes of Nuclear Power Plant

Study on Microstructure Evolution and Properties of SA738Gr.B Steel with Different Austenitizing Holding Time and Peak Temperature

Study on low cycle fatigue of ferritic-martensitic steel at high temperature