Abstract:Structures having the shape of blades are often found in several practical engineering examples such as turbines and aircraft rotary wings. For reliable and economic designs of the structures, it is necessary to estimate the modal characteristics of those structures accurately. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. A single free standing blade can be considered as a pretwisted cantilever beam with a rectangular cross-section. The torsional vibration of pre twist cantilever beam of rectangular cross section is done so that this resembles to a blade. The differential equation for the torsional vibration of pre-twisted cantilever beam of rectangular cross section has been obtained. The beam is considered as Timoshenko beam instead of Euler-Bernoulli Beam or Rayleigh Beam because it will consider shear correction factor, rotary inertia, warping constant. The Galerkin’s method is used to obtain the frequencies of various modes of vibration. This is again solved by fem software ANSYS and their results are compared. Introduction The torsional vibration of a rotating structure can occur in many engineering applications such as turbomachinery blades, slewing robot arms, aircraft propellers, helicopter rotors, and spinning spacecraft. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. It is very important for manufacturers of turbo machinery components to know the natural frequencies of the rotor blades, because they have to make sure that the turbine on which the blade is to be mounted does not have some of the same natural frequencies as the rotor blade. Otherwise, a resonance may occur in the whole structure of the turbine, leading to undammed vibrations, which may eventually wreck the whole turbine. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. Moreover, under the resonance conditions, what limits the vibration amplitude is the amount of damping available. In most cases, the damping is almost entirely aerodynamic and its assessment is just as uncertain as the excitation. Thus, classic design practice for such structures has been mainly to rely on the knowledge of the natural frequencies to avoid anticipated resonances.

Numerical Calculation Method of Natural Frequency for Free Vibration of Aero-engine Rotor Blade

Vibration Equation and Frequency Computation of an Aero-engine Rotor Blade

Research on Boundary Conditions of T Steam Turbine Blade by Finite Element Model Analysis

A New Method of Analysis on Natural Frequency Correlation of Wind Turbine Blade

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Modal Analysis on Dual-Rotor System of Aero-Engine

Theoretical Analysis and Numerical Simulation of Rotor Blade Based on Couple Stress

Vibration characteristics on a wind turbine rotor using modal and harmonic analysis of FEM

The Calculation of Natural Frequencies of Stator System and Electromagnetic Acoustic Noise of AFIR Disc PM Machine

Numerical Method for Computing Modal Damping of Rotor System

Torsional Vibration Analysis of Pre-Twist Cantilever Beam Using FEM

Frequency Lock-In Phenomenon of Vortex Induced Vibration of a Rotating Blade Considering Bending-Torsion Coupling Effect

MODELING AND CALCULATION OF THE NATURAL FREQUENCY OF 300 MW URBO-GENERATOR ROTOR SHAFT SYSTEM

Triply Coupled Bending-Bending-Torsion Vibrational Analysis of Rotating Beams Using Fem and Dynamic Finite Element Formulation

Coupled bending-torsional vibrations of rotating cantilever blades—method of polynomial frequency equation

NATURAL FREQUENCY ANALYSIS FOR TORSIONAL VIBRATION OF A GEAR-ROTOR SYSTEM WITH RANDOM PARAMETERS

Transverse vibration of the blade for unmanned micro helicopter using Rayleigh-Ritz method

Research on natural vibration responses based on asymmetrical dual-rotor model

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Analysis of Instantaneous Vibrational Energy Flow for an Aero-Engine Dual-Rotor–Support–Casing Coupling System

Aerodynamic Design and Modal Analysis on Wind Turbine Blade Based on CAD/CAE