Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In the vibration test of an entire aero-engine, the magnitude and phase of the unbalanced vector of the internal rotor must be identified based on the vibration signal of the measuring point on the casing. Therefore, in addition to understanding the vibration transmission law between the high- and low-pressure rotors under unbalanced excitation, the vibration transmission law of the support structure must be studied urgently. However, few studies have investigated the vibration transfer characteristics of typical support structures. In this study, the similarity design of typical support structures was first performed, and the structural parameters of the core member squirrel cage were determined using theoretical calculations. Subsequently, the bush and spring elements were used to establish the connection between the inner and outer rings of the bearing to realise the equivalent simulation of the bearing stiffness. Using this method, refined finite element models of elastic and rigid support structures were established, and the accuracy of the model was verified based on low-speed rotating vibration and hammering tests. Furthermore, the unbalanced vibration transmission law of typical support structures was studied, and the vertical vibration transmission law from an aero-engine bearing pedestal to the panel was established with the vibration transmission rate as the quantitative index. Finally, considering the vital role of the squirrel cage, the influence of the local stiffness degradation of the squirrel cage on the unbalanced vibration transmission of the elastic support structure was studied. The research methods and results of this study can provide a basis for aero-engine assembly as well as manufacturing and structural performance evaluation.

Analysis of Instantaneous Vibrational Energy Flow for an Aero-Engine Dual-Rotor–Support–Casing Coupling System

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Analysis of the similarity design and vibration transmission characteristics of typical support structures of an aero-engine

Modal Analysis on Dual-Rotor System of Aero-Engine

Evaluation Method for Vibration Measurement on Casing in Aeroengine: Theoretical Analysis and Experimental Study

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

INVESTIGATION OF FAN BLADES VIBRATION DUE TO BLADE/CASING RUBBING INTERACTIONS USING IN-PLANE TWO-DIMENSIONAL MODEL

Investigation of the Vibration Transmission Characteristics of the Aero-Engine Casing System by Rotating Force Exciter

General dynamic model of aeroengine's rotor system during maneuvering flight

Digital Simulation of Coupled Dynamic Characteristics of Open Rotor and Dynamic Balancing Test Research

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Study on Vibration and Bifurcation of an Aeroengine Rotor System with Elastic Ring Squeeze Film Damper

Research on natural vibration responses based on asymmetrical dual-rotor model

Prediction of Transient Vibration Response of Dual-Rotor-blade-casing System with Blade Off

Dynamical Modeling and Dynamic Characteristics Analysis of a Coaxial Dual-Rotor System

Analysis on Influences of Squeeze Film Damper on Vibrations of Rotor System in Aeroengine

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Multi-Objective Optimization Design Method for Whole-Aeroengine Coupling Vibration

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Nonlinear vibrations of a dual-rotor-bearing-coupling misalignment system with blade-casing rubbing

Vibration Suppression of Additional Unbalance Caused by the Non-continuous Characteristics of a Typical Aero-Engine Rotor