Abstract:A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co3O4 nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co3O4 particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co3O4 increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co3O4 crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co3O4 crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C5+ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C5+ selectivity and C3 olefin/paraffin ratio, and an increase of CH4 selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Cop/Al2O3-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C5+ selectivity.

Effect of Active Metal Composition on the Yield and Microstructure of Carbon Nanofiber

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Effect of Catalyst Structure on Growth and Reactivity of Carbon Nanofibers over Ni/MgAl2O4

Dynamic State and Active Structure of Ni–Co Catalyst in Carbon Nanofiber Growth Revealed by in Situ Transmission Electron Microscopy

Impaction of Precursor Gas-Induced Catalyst Change on Morphology, Growth Kinetics and Field Emission Property of Carbon Nanofibers

Catalytic Performance of Iron Oxide Loaded on Electron-Rich Surfaces of Carbon Nitride

How reduction temperature affects the properites of carbon nanotubes growing over Fe-MgO/Al2O3 catalyst

Synthesis of carbon nanofibers by CO disproportionation: Influence of iron catalyst reduction

Effect of Hydrogen on the Synthesis of Carbon Nanofibers by CO Disproportionation on Ultrafine Fe3O4

Structural Characterization of Carbon Nanofibers Formed from Different Carbon-Containing Gases

Kinetically Controlled Synthesis of Carbon Nanofibers with Different Morphologies by Catalytic CO Disproportionation over Iron Catalyst

High strength carbon nanofiber composite by in-situ synthesis for catalytic application

Tracing the Active Phase and Dynamics for Carbon Nanofiber Growth on Nickel Catalyst Using Environmental Transmission Electron Microscopy

Toward CH4 Dissociation and C Diffusion During Ni/Fe-catalyzed Carbon Nanofiber Growth: a Density Functional Theory Study.

Catalytic effect of the spinel ferrite nanocrystals on the growth of carbon nanotubes

The Effect of the Nanofibrous Al2O3 Aspect Ratio on Fischer-Tropsch Synthesis over Cobalt Catalysts.

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Growth and Field Emission of Carbon Nanofibers on Electroless Ni-P Alloy Catalyst

Preparation of Ni–Cu Catalyst for Carbon Nanofiber Production by the Mechanochemical Route