Abstract:Hollow fiber membrane contactors (HFMCs) for degasification offer several advantages, including compact design, reduced power consumption, and higher mass transfer rate compared to conventional technologies. These characteristics make HFMCs an ideal choice for applications such as ultrapure water production and wastewater treatment, where the removal of even trace amounts of dissolved gases is critical. In this study, we conducted 3D computational fluid dynamics (CFD) simulations to explore the impact of geometric features on HFMC hydrodynamic performance. A scaled-down version of a commercial module (3 M-Liqui-Cel TM ) was used, preserving the actual dimensions and spacing of the hollow fiber membranes. Four different configurations were considered in the simulations based on the presence of a baffle and variations in the size and arrangement of liquid distributors. Analyses of fluid motion and pressure drop indicated that designs with larger distributors and internal baffles may reduce stagnation zones and promote more uniform flow distribution. At higher velocities, multiple recirculation areas were observed within the domain, with the size and volume of these zones varying across the different designs. These enhancements, driven by velocity fluctuations, vortex formation, and eddies, could potentially lead to higher mass transfer rates, especially at elevated flow rates. Additionally, the swirling arrangement of distributor holes in varied sizes yielded the lowest pressure drop for all flow rates studied, offering benefits in reduced energy consumption and increased operational efficiency. Our simulation results highlight the potential of optimized distributor hole sizes and patterns to enhance flow mixing and minimize pressure drop.

Optimal Simulation of Submerged Hollow Membrane Fiber Module

[Membrane Fouling Control in a Free-End Comb-Like Hollow Fiber Membrane Bioreactor].

Modeling and optimization of hollow fiber DCMD module for desalination

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Numerical Simulation and Optimal Design of AGMD-Based Hollow Fiber Modules for Desalination

Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration

Non-uniform Distribution of Adsorptive Fouling along Hollow Fiber Membrane: Characterization and Quantification

Three-dimensional CFD modeling for hollow fiber gas separation membrane modules based on a dual porous media model

Numerical Simulation of Shell-Side Flow in Hollow Fiber Modules

Review of membrane fouling stages and mathematical models for hollow fiber membrane

Spatial variations of DCMD performance for desalination through countercurrent hollow fiber modules

Analysis on the structure of different hollow fiber membrane contactors

A Design of Composite Hollow Fiber Membranes with Tunable Performance and Reinforced Mechanical Strength

3D CFD Analysis of Geometrical Design Impact on Hydrodynamic Performance in Hollow Fiber Membrane Contactors

In-situ monitoring techniques for membrane fouling and local filtration characteristics in hollow fiber membrane processes: A critical review

An experimental and modeling investigation of the behaviors of solution in fluoropolymers hollow fiber membranes (HFMs)

The role of fouling in optimizing direct-flow filtration module design

Optimization of Membrane Unit Location in a Full-Scale Membrane Bioreactor Using Computational Fluid Dynamics

Designing Scalable Dual-Layer Composite Hollow Fiber Nanofiltration Membranes with Fully Cross-Linked Ultrathin Functional Layer

ANNOUNCEMENT: 2001 Best Paper Award Committee

On line monitoring local fouling behavior of membrane filtration process by in situ hydrodynamic and electrical measurements