Abstract:Radiation safety standards today require comprehensive shielding protection schemes for all particle accelerators. The original shielding system of BJ-20 (BeiJing-20 MeV), the high-energy medical electron linac, was designed only for the 18 MeV level. And the dose caused by the lost electrons in the 270° bending magnet system was neglected. In this paper, the leakage dose of BJ-20 is carefully analyzed. The radiation leakage dose distribution of the photons coming from the accelerator head is obtained for energy levels of 6, 12, 14, and 18 MeV. The dose of the photoneutrons is especially analyzed for the 18 MeV level. The result gives that even neglecting the dose from the 270° bending magnet system, the shielding system is still not enough for the energy levels lower than 18 MeV. The radiation leakage produced by electrons that are lost in the 270° bending magnet system has been particularly studied. Using beam transport theory and Monte Carlo sampling methods, which have been combined in calculations, we have obtained the distribution of the energy, position, and direction of the lost electrons. These data were then further processed by the Monte Carlo N-particle (MCNP) code as input data. The results show that when the electron loss rate in the 270° bending magnet system is 13.5%, the radiation leakage dose of the photons generated by the lost electrons is 0.1% higher than that at the isocenter, and the corresponding relative leakage dose of the photoneutrons reaches 0.045% around an angle of 170° at 18 MeV level. Both of these parameters exceed radioprotection safety standards for medical accelerators. The original shielding design is therefore not suitable and is also incomplete since the radiation produced by the electrons being lost in the 270° bending magnet system was neglected and the leakage dose for the low-energy levels was not considered in the original design. Our calculations provide a very useful tool for further optimization and design improvement that will enable this radiation shielding to conform to present day safety standards.

The Analysis Calculation for the Scattering from Medical Electron Linac Head Structure

Electron Beam Therapy Mode Analysis of Medical Linac by BEAM Code

MCNP simulation of X-ray beam for a 15 MV medical linear accelerator

The Medical Linac Photon Angular Distribution Study By Monte Carlo Method

Monte carlo simulation of radiation field optimization for medical linac

Physical Analysis of the Radiation Shielding for the Medical Accelerators

SU‐E‐T‐19: Monte Carlo Simulation of XHA600D 6MV Linear Accelerator

Use of Monte Carlo Simulations for the Scatter Events Analysis of PET Scanners

A Convenient multiple source model for varian 2300C 6 MV-X Beam based on Monte Carlo simulated linac

Simulating Varian 2300C 6 MV-X Beam by Monte Carlo Code

Optimalizing electron beam parameters of linear accelerator based on Monte Carlo simulation

The Experimental study of medical linac X-ray doses

Reconstruction of X-ray Spectra for Radiation Therapy

Medical linac photon skyshine: Monte Carlo calculations and a methodology for estimates

MCNP simulations of medical diagnostic X-ray spectra

SU-GG-T-347: Methods to Calculate Organ Doses Due to Scattered Radiation From External Beam Radiation Treatment Using Various Patient Phantoms and Monte Carlo Simulations

Monte Carlo Calculation of Induced Radioactivity for a 15-MV Electron Accelerator Head Structure

The Monte Carlo Simulation of Tsinghua Homo-Source Dual-Beam Medical Accelerator

SU-FF-T-316: Modifications to the “three-Source Model” for the Calculation of Head Scatter Factors for Small Field Sizes

Experimental determination of electron source parameters for accurate Monte Carlo calculation of large field electron therapy

Monte Carlo simulation of whole body dose distribution in patients with total body X (γ) ray irradiation