Abstract:The corrosion inhibition and adsorption processes of L METHIONINE SULFONE (LMS) on mild steel in 2 HCl was studied by means of chemical (weight loss), electrochemical and quantum chemical techniques. The inhibition efficiency increases with decreasing temperature and increasing concentration of inhibitor. It has been determined that the adsorption of LMS on mild steel obeys the Temkin adsorption isotherm at all studied temperatures with negative values of ∆G o ads, suggesting a stable and a spontaneous inhibition process. In potentiodynamic polarization, the curves shifted towards lower current density in the presence of LMS with well-defined Tafel regions suggesting that the inhibitor retard the corrosion process without changing the mechanism of the corrosion process; and exhibit cathodic and anodic polarization (mixed type inhibitors) because the change in Ecorr is less than 85 vM/SCE with respect to the blank. Corrosion current density was calculated by extrapolation of the linear parts of these curves to the corresponding corrosion potential; and corrosion potential (Ecorr), corrosion current densities (icorr), anodic Tafel slope (βa), cathodic Tafel slope (βb) were determined with maximum value of inhibition efficiency for 5 x 10 -4 M concentration of the inhibitor at 303 K is 75.1%. From Nyquist plots of electrochemical impedance spectroscopy, value of polarization resistance (Rp) increased with increasing inhibitor concentration whereas double layer capacitance (Cdl) decreased indicating a decrease in local dielectric constant or an increase in thickness of electric double layer suggesting that the inhibitors function by forming a protective layer at the metal surface. Inhibition efficiency value (η %) is 55.9%. Quantum chemical calculations were performed using Density Functional Theory (DFT) with the help of complete geometry optimization for theoretical calculations of EHOMO, ELUMO, and energy gap (∆E). Inhibition efficiency increases with increasing EHOMO indicating that the molecule has tendency to donate electrons to the appropriate acceptor molecule with low energy empty molecular orbital; whereas low value of ELUMO suggests that the molecule easily accepts electrons from donor molecules. © 2019 Elixir All rights reserved. Elixir Comp. Chem. 129 (2019) 52983-52988 Computational Chemistry Available online at www.elixirpublishers.com (Elixir International Journal) Ekerete Jackson./ Elixir Comp. Chem. 129 (2019) 52983-52988 52984 These compounds can adsorb onto the mild steel surface and block active sites, thus decreasing the corrosion rate. Most well-known acid inhibitors are organic compounds containing nitrogen, sulfur, and oxygen atoms. Among them, nitrogen-containing heterocyclic compounds are considered to be effective corrosion inhibitors on steel in acid media [11]. N-heterocyclic compound inhibitors act by adsorption on the metal surface, and the adsorption as well as those with triple or conjugated double bonds or aromatic rings in their molecular structures. Thus, the inhibitory effect of L METHIONINE SULFONE on mild steel corrosion in 2 M HCl at 303 -333 K was studied by weight loss as well as by quantum chemical studies. The inhibitor adsorption mechanism was studied, and the thermodynamic functions for the dissolution and adsorption processes were calculated and discussed. The choice of this compound was also based on molecular structure considerations and has not been investigated as corrosion inhibitor. The molecular structure of L METHIONINE SULFONE (LMS) is as shown below: Figure 1. The chemical structure of L METHIONINE

Inhibition of methionine against aluminium alloy in chloride-containing solutions

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Study on Inhibition Behavior of Aluminum-Based Detergent

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Corrosion inhibition effect of several amino acids on an Al-Zn-Mg-Cu alloy: Electrochemical study, DFT and MD simulation

INFLUENCE OF ORGANIC AMINES ON CORROSION INHIBITION AND CF LIFE OF ALUMINOM ALLOY LY12

Corrosion of Ly12 Aluminum Alloy in Sodium Chloride Solution

Imidazolium-Based Ionic Liquid as Efficient Corrosion Inhibitor for AA 6061 Alloy in HCl Solution

Mechanism of Inhibitive Action of Dl-Methionine Towards the Corrosion of Mild Steel in Hydrochloric Acid Solution

Inhibiting Effect of Sodium Lignosulphonate on the Corrosion of AZ31 Magnesium Alloy in NaCl Solution

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

Corrosion Behaviour of Ly12 Alloy under Thin Electrolyte Films

Inhibition effect of lithium salts on the corrosion of AA1100 aluminium alloy in ordinary Portland cement pastes

Synergistic inhibition effect of L-Phenylalanine and zinc salts on chloride-induced corrosion of magnesium alloy: Experimental and theoretical investigation

Lithium Carbonate and Oxalate Salts as Corrosion Inhibitors for Magnesium Alloy AZ31 B in NaCl Solution

Experimental and theoretical studies of the efficiency of metal–organic frameworks (MOFs) in preventing aluminum corrosion in hydrochloric acid solution

Unveiling the effect of Al-Mn intermetallic on the micro-galvanic corrosion of AM50 Mg alloy in NaCl solution

Experimental and Theoretical Approach of L-Methionine Sulfone (LMS) as corrosion inhibitor for mild steel in HCL Solution

Corrosion Inhibition of AZ31-xLi (x = 4, 8, 12) Magnesium Alloys in Sodium Chloride Solutions by Aqueous Molybdate

Corrosion Morphology for LY12 Aluminum Alloy Friction Stir Welded in 3.5% NaCl Solution