Unexpectedly Increased Particle Emissions from the Steel Industry Determined by Wet/Semidry/Dry Flue Gas Desulfurization Technologies.
X. Ding,Qing Li,Di Wu,Yingguang Liang,Xianmang Xu,Guangzhao Xie,Yaqi Wei,Hao Sun,Chao Zhu,Hongbo Fu,Jianmin Chen
DOI: https://doi.org/10.1021/acs.est.9b03081
2019-01-01
Abstract:"Ultralow-emission" standards have started to be implemented for steel plants in China. Flue gas desulfurization (FGD) systems integrating desulfurization and dedusting, common end-of-pipe technologies before the stacks, have been a key process for controlling the complexity of sintering flue gas to meet "ultralow-emission" requirements. This study reports a comprehensive analysis of the influence of wet/semidry/dry FGD systems on particulate emissions via a field investigation of five typical sinter plants equipped with various FGD devices. The size distribution and mass concentration of particulate matter (PM) are adjusted to different ranges by these FGD systems. Chemical analysis of the PM compositions shows that 20% ~ 95% of the mass of inlet PM is removed by FGD systems, while it is estimated that approximately 17%, 63%, 59%, and 71% of outlet PM is newly contributed by desulfurizers and their byproducts for the tested wet limestone, wet ammonia, semidry circulating fluidized bed (CFB), and activated coke FGD systems, respectively. The newly contributed composition of PM2.5 emitted from these FGD systems is dominated by CaSO4, (NH4)2SO4, CaSO4 + CaO, and coke carbon, respectively. These results suggest that the deployment of FGD technology should be comprehensively considered to avoid additional negative impacts from control devices on the atmosphere.