Abstract:A method was proposed to improve the measuring precision when using vibration method to measure the short hanger tension. The method identifies the tension, flexural rigidity and damper stiffness simultaneously by combining additional mass method and genetic algorithm. The natural frequency can be changed by adding mass block to different heights of the short hanger. Thus several more identification conditions can be obtained. Not less than four identification conditions should be established in order to identify four parameters, containing hanger tension, flexural rigidity and the damper stiffness at both ends of the hanger. The inverse calculation of the transcendental equations is quite complex. The problem is simplified to a work of minimal optimization. The unknown parameters are identified by the genetic algorithm finally. The identification accuracy was testified by numerical simulation and field measurement. The result evidences that the proposed method can identify the tension, flexural rigidity and damper stiffness simultaneously. The errors of tension are no more than 1% in numerical simulation and 7% in field measurement. The method can be considered as reference in measuring the hanger tension of arch bridges with dampers.

Research on Precision Test Method of Anti-bending Stiffness of Structure Parts

Estimation of Tension Force in Short Hangers Using Added Mass Method

Identification method for tensile force in hanger of arch bridges with damper and its application

An Identification Method For Short Hanger Tension Of Arch Bridges

Developing of a Stiffness Testing System of Micro-torsion Spring

EXPERIMENTAL STUDY ON THE MECHANIC BEHAVIOR OF UNSTIFFENED STEEL TUBULAR X-JOINT

Test on Forces in Flexible Hanger Rods in Combinatorial Bridges with Beams and Arches

Structural Finite Element Analysis of the Fixed Stiffness Testing Instrument

Finite element analysis and structural optimization for fixed stiffness tester

Design and Development of Measurement System for Static Rigidity of Machine Tool with Computer Aided

A New Method For Test The Rigidity Of Multiple Displacements Of Flexural Parts

Development of V-Bending Test Machine for Ultra-High-Strength Steel Sheet and Analysis of Load Precision

Research on Stiffness Precise Measurement of Spring Tubes

Optimal design for high precision stiffness surveying instrument

The measurement of bending rigidity of flexible bar

Research on Sensor of Flexible Joint Stiffness Measurement

Designing of Mechanical Structure and Translocating Clamp in Flexible Joint Stiffness Measuring System

Auto-measuring Instrument of Rigidity of Precise Elastic Parts

Optimized structure design of portable stiffness testing instrument

Research on the Stiffness Measuring System of Car BIW

A New Test Method of Spindle Static Stiffness and its Application