Fatigue life prediction method of Q235 steel single lap thin-walled bolted connections under shear loading
Long Yang,Guangwu Yang,Han Zhao,Bing Yang,Lanxin Jiang,Shoune Xiao
DOI: https://doi.org/10.1016/j.tws.2023.111507
IF: 5.881
2024-03-01
Thin-Walled Structures
Abstract:In this study, a large number of shear fatigue tests were conducted on Q235 steel single lap thin-walled bolted connections to investigate the influence of different geometric and load parameters on the dispersion of fitting data for load amplitude-life (F a–N) curves. Due to the large dispersion of fitting data, the F a–N curves were unable to meet engineering requirements. In order to standardize these F a–N curves, an equivalent structural stress model for single lap thin-walled bolted connections was established based on a mechanical model with a strict physical definition. The shell equivalent model of the Q235 steel single lap thin-walled bolted connection was developed using the Rupp structural stress calculation method, and the equivalent structural stress was determined by considering the node loads coupled by the beam element. Subsequently, a normalized fatigue characteristic curve (S s–N curve) was created to standardize the F a–N curves. However, differences in external load, pre-tightening force, bolt diameter, and plate thickness resulted in a relatively low correlation across the entire S s–N curve. To address this, four quasi-Newton optimization algorithms (C1–C4) were employed to optimize the equivalent structural stress model. This approach yielded the best optimization model for equivalent structural stress and an S s–N curve with a higher correlation. These findings offer valuable insights for optimizing single lap thin-walled bolted connection parameters and predicting fatigue life.
engineering, mechanical,mechanics, civil