Abstract:Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their stationary counterparts. As a result, heat transfer correlations based on the stationary particle bed thermal conductivity could be inadequate for flowing particles in a heat exchanger. Earlier works have achieved reasonable agreement with experiments by treating granular media as a plug-flow continuum with a near-wall thermal resistance in series. However, the properties of the continuum were often obtained from measurements on stationary beds owing to the difficulty of flowing bed measurements. In this work, it was found that the properties of a stationary bed are highly sensitive to the method of particle packing and there is a decrease in the particle bed thermal conductivity and increase in the near-wall thermal resistance, measured as an effective air gap thickness, on the onset of particle flow. These variations in the thermophysical properties of stationary and flowing particle beds can lead to errors in heat transfer coefficient calculations. Therefore, the heat transfer coefficients for granular flows were calculated using experimentally determined flowing particle bed thermal conductivity and near-wall air gap for ceramic particles -CARBOCP40/100(275 um), HSP40/70(404um) and HSP16/30(956um); at velocities of 5-15mms-1; and temperatures of 300-650C. The thermal conductivity and air gap values for CP40/100 and HSP40/70 were further used to calculate heat transfer coefficients across different particle bed temperatures and velocities for different parallel-plate heat exchanger dimensions.

Model of contact heat transfer in granular moving bed

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

DEM Simulation of Heat Transfer in Granular Materials

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

TDEM Simulation and Analysis of Thermal Conduction Through Packed Granular Beds

A Novel Contact Thermal Resistance Model for Heat Transfer in Granular Systems: Leveraging the Force-Heat Analogy

Micromechanical Origin of Heat Transfer to Granular Flow

Numerical Study of Mixing and Thermal Conduction of Granular Particles in Rotating Tumblers

The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation

DEM Investigation on the Flow and Heat Transmission Characteristics of Multi-Size Particles Mixed Flow in Moving Bed

A coupled contact heat transfer and thermal cracking model for discontinuous and granular media

Heat current model of solid granule cooling processes in moving packed beds and its applications

Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance

A Model to Improve Granular Temperature in CFD-DEM Simulations

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

Numerical investigation of flow and energy dissipation for granular materials in moving bed heat exchangers based on μ(I) theory

Discrete Element Method Simulation on the Immigration of Granular Matter in a Vertically Vibrating U-Tube

Particle-Scale Investigation of Thermal Radiation in Nuclear Packed Pebble Beds