Abstract:In the field of waste heat recovery, tubular moving bed heat exchangers (MBHEs) hold great promise as equipment capable of effectively handling large-sized granular materials with high temperature. To further clarify the heat and mass transfer characteristics within tubular MBHEs, this study firstly conducted detailed investigations on the contributions of different heat transfer mechanisms. The result shows that heat radiation (∼45%) and gas film heat conduction (∼42%) control the heat transfer processes involving tube walls, with an inlet particle temperature of 600 °C, tube wall temperature of 50 °C, and particle descent velocity of 2 mm/s. These contributions can be influenced by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. Additionally, for a specific particle, its heat transfer state is highly depended on where it is located. Subsequently, the time-varying and space-varying characteristics of the heat transfer processes involving tube walls are studied. The results suggest that the time-varying and space-varying characteristics are inherent in tubular MBHEs due to the difficulty to achieve complete stability. Meanwhile, temporal fluctuations intensify with an increase in the inlet particle temperature, a decrease in wall temperature, or an increase in particle descent velocity. The result of power spectral density (PSD) indicates that the heat transfer processes exhibit a degree of chaotic behavior due to the nonlinear property of sub-models, as well as the randomness in particle feeding and contacts. The space-varying characteristic is mainly determined by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. This characteristic can be observed in both the axial and circumferential directions, with the circumferential variation being more pronounced than the axial variation. Furthermore, a double-tube MBHE, a topic that has received scant attention in previous research, is investigated in comparison to a single-tube MBHE to explore the differences in heat and mass transfer between the two configurations. It indicates that under the same boundary conditions, there are differences in heat transfer results, which are attributed to the interactions between two vertically arranged tubes. These interactions are reflected in the reconstruction of particle flow patterns and the effect altering the temperature distribution for the particles or fluid surrounding the tubes. The obtained results provide valuable insights into the mass and heat transfer behaviors of particles and fluids within tubular MBHEs, laying a foundation for advancing the development of efficient tubular MBHEs.

DEM Investigation on the Flow and Heat Transmission Characteristics of Multi-Size Particles Mixed Flow in Moving Bed

Simulation Study on Heat and Mass Transfer Characteristics Within Tubular Moving Bed Heat Exchangers

Numerical investigation of flow and energy dissipation for granular materials in moving bed heat exchangers based on μ(I) theory

Model of contact heat transfer in granular moving bed

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Heat transfer enhancement of MBHE via structural optimization for high-temperature granular heat recovery

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Investigation into flow and heat transfer characteristics of sparse particles in beam fluidized bed receiver

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed

A comprehensive heat transfer prediction model for tubular moving bed heat exchangers using CFD-DEM: Validation and sensitivity analysis

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

CFD-DEM investigation of flow and heat transfer characteristics in a directly irradiated fluidized bed

Eulerian-Lagrangian Simulation of the Heat Transfer Behavior of Particles with Different Diameters in Fluidized Bed with Immersed Tube

Numerical simulation of gas–solid heat transfer characteristics of porous structure composed of high-temperature particles in moving bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Improving the Analysis of Heat Transfer in Packed Beds: A Comparative Study between DEM Simulations and Existing Literature Models

Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance

Analysis of structures and heat transfer for packed beds

Numerical investigation of flow stratification behavior of binary particle mixture for high-temperature flue gas filtration on an inclined moving bed

Heat transfer model of a particle energy storage‐based moving packed bed heat exchanger