Abstract:The pebble-bed high-temperature gas-cooled reactor (HTGR) is an advanced nuclear system with inherent safety. The nuclear reactor is operated in high-temperature ranges and its design temperature limit is 1600 °C. It is important to discuss the conduction–radiation heat transfer in the nuclear pebble bed during the thermal hydraulics analysis. Until now, the investigation mainly focuses on large-scale experimental tests, such as the Selbsttätige Abfuhr der Nachwärme (SANA) test by the International Atomic Energy Agency (IAEA), high temperature test unit (HTTU) under low gas pressure by North-West University of South Africa, and the pebble bed equivalent conductivity measurement (PBEC) under vacuum conditions for the high temperature gas-cooled reactor pebble bed module (HTR-PM) project by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University. In this work, a thermal resistance model was developed to calculate the conduction–radiation effective thermal conductivity of nuclear pebble beds. With the constitutive continuum modeling for conduction, contact resistance, coordination number, and void fraction are considered for physical expressions, and heat conduction in the packed bed will be enhanced directly by higher packing density and more contact. For thermal radiation dominated by the heat transfer process under high temperatures, a sub-cell model with an equivalent resistance network is developed to calculate the radiative exchange factor, and the void fraction effect is implemented by a modification term with thermal ray tracing results. At low packing density, because the thermal rays from the local pebble will travel a further distance until reaching the surrounding pebbles, the local sphere will be in contact with more particles by thermal radiation, and the heat transfer is enhanced. Compared with the empirical correlations, the present model is proven to be applicable for both dense and dilute cases. In the nuclear pebble bed, the present conduction–thermal radiation model agrees generally with experimental data under different temperatures and can be applied in the particle-scale CFD-DEM simulations. The present work provides a meaningful approach for conduction–thermal radiation heat transfer for engineering and nuclear pebble-bed design.

A Novel Contact Thermal Resistance Model for Heat Transfer in Granular Systems: Leveraging the Force-Heat Analogy

A Novel Equivalent Agglomeration Model for Heat Conduction Enhancement in Nanofluids

Model of contact heat transfer in granular moving bed

Heat Transfer of Granular Flow Around Aligned Tube Bank in Moving Bed: Experimental Study and Theoretical Prediction by Thermal Resistance Model

A coupled contact heat transfer and thermal cracking model for discontinuous and granular media

Conductive and Radiative Heat Transfer Mechanisms Inform Nusselt Number Dependence on Solid Volume Fraction for Granular Flows

Micromechanical Origin of Heat Transfer to Granular Flow

Study on Particle Thermal Radiation Algorithm in Dense Granular Systems

Fractal Analysis of the Effect of Particle Aggregation Distribution on Thermal Conductivity of Nanofluids

Numerical investigation of heat resistances in uniform dense granular flows along a vertical plate

A Thermal Resistance Model of Conduction–thermal Radiation Heat Transfer in Pebble-Bed Nuclear Reactors

The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation

TDEM Simulation and Analysis of Thermal Conduction Through Packed Granular Beds

DEM Simulation of Heat Transfer in Granular Materials

A thermal model in frictional contacts

Heat current model of solid granule cooling processes in moving packed beds and its applications

Numerical Simulation and Theoretical Analysis of Thermal Boundary Characteristics of Convection Heat Transfer in Porous Media

Thermal contact resistance on cylindrical flux channel with high contact ratio

A New Uniform Continuum Modeling of Conductive and Radiative Heat Transfer in Nuclear Pebble Bed

Grain size effects on effective thermal conductivity of porous materials with internal thermal contact resistance