Abstract:Granular flows with solid particles play an important role in energy and catalysis applications. To predict thermal performance, this study develops a comprehensive discrete particle tracking flow model fully coupled with conductive and radiative heat transfer. Leveraging LIGGGHTS, our model uniquely integrates particle-particle and particle-wall thermal radiation for grey radiative surfaces up to nearly 10 times of particle size. Models include: (a) plug flows of particles with a near-constant streamwise velocity and (b) gravity-driven, dense, moving beds of particles to determine wall-to-particle heat-transfer coefficients with isothermal channel walls. The plug flow model is used to interrogate the interdependent effects of flow-regime-dependent solid volume fractions (0.02 -- 0.48), particle size (0.4 -- 1 mm), operating wall temperatures (700 -- 1300 K), and thermophysical particles properties including emissivity (0.1 -- 1) and thermal conductivity (0.16, 33 W/m/K). The overall and conductive heat-transfer coefficients increase with solid volume fraction, while radiation contribution decreases. For a fixed solid volume fraction, heat-transfer coefficients exhibit linear dependence on particle emissivity and cubic dependence on wall temperature, driven by enhanced thermal radiation. For a fixed mass flow rate, the dependence of radiative heat-transfer coefficient on particle size changes with solid volume fraction. To generalize the applicability of our results, heat-transfer coefficients are transformed into a dimensionless Nusselt number, and establish its dependence on solid volume fraction. These results reveal the high sensitivity of the overall Nusselt number to even small changes in solid volume fraction in the dense flow regime, particularly for the high-conductivity alumina particles. In contrast, the radiative Nusselt number asymptotes for large solid volume fractions.

Conductive and Radiative Heat Transfer Mechanisms Inform Nusselt Number Dependence on Solid Volume Fraction for Granular Flows

Natural convection heat transfer in concentric annuli with nanofluids

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Laminar mixed convection heat transfer of SiC-EG nanofluids in a triangular enclosure with a rotating inner cylinder: simulations based on the measured thermal conductivity and viscosity

Convective Heat Transfer Coefficient for a Rod-Like Particle in a Uniform Flow

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Effects of Particle Velocity Fluctuations on Inter-Phase Heat Transfer in Gas-Solid Flows

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Numerical investigation of natural convection flow inside a square enclosure filled with different nanofluids by using two-phase Eulerian–Eulerian model: A new correlation for Nusselt number

Heat Transfer of Granular Flow Around Aligned Tube Bank in Moving Bed: Experimental Study and Theoretical Prediction by Thermal Resistance Model

A Novel Contact Thermal Resistance Model for Heat Transfer in Granular Systems: Leveraging the Force-Heat Analogy

Experimental and numerical study of mixed convection heat transfer in a vented cavity partially filled with a porous medium: Effects of reynolds and rayleigh numbers on Nusselt number and flow regimes

The Role of Permeability in Lid-Driven Cavity Flow Containing a Cluster of Hot Solids

A Solid-Liquid Local Thermal Non-Equilibrium Lattice Boltzmann Model for Heat Transfer in Nanofluids. Part II: Natural Convection of Nanofluids in a Square Enclosure

Micromechanical origin of heat transfer to granular flow

Importance of Thermal Conductivity Models in Analyzing Heat Transfer of Radiative Hybrid Nanofluid Across a Stretching Sheet using Darcy-Forchheimer Flow

Heat transfer analysis on micropolar alumina–silica–water nanofluid flow in an inclined square cavity with inclined magnetic field and radiation effect

Heat Transfer Studies of Arrays of Prolate Particles in Gas-Solid Flows

Direct Numerical Simulation Of Flow And Heat Transfer In Bidisperse Gas-Solid Systems

The effect of the flow and solid matrix parameters on the Nusselt number for free convection over horizontal cylinder by considering the boundary layer and local thermal non-equilibrium model

Study on flow and heat transfer characteristics of liquid metal flow in narrow rectangular channels under high heat flux