Abstract:In practice, reinforced concrete (RC) structures before and after strengthening usually is exposed to a wide variety of combined actions, which may cause various damage to the structures. The main objectives of this study are to investigate the effects of three types of pre- and post- strengthening damage in the marine environment on the flexural behaviors of carbon fiber-reinforced polymer (CFRP)strengthened RC beams and to develop a design methodology for predicting their yielding load, debonding load and peak load with or without CFRP debonding. The pre-damage was induced by either sustained load only or by the combination of sustained load and corrosion. The post-damage was induced by combined sustained load and wetting/drying (WD) cycles. The failure mode, yielding load, debonding load and peak load were recorded and compared, and the related mechanism was discussed. Subsequently, by adopting nonlinear sectional analysis, the effect of non-uniform corrosion of steel reinforcement on the yielding load, the effect of WD cycles on the debonding load and the effective CFRP rupture strain were examined and several models were proposed accordingly. The yielding strength, debonding strength and peak strength of the beams can be predicted by the proposed models with sufficient accuracy. The reliability of the proposed models was further validated with a collected database from the existing literatures. (C) 2016 Published by Elsevier Ltd.

Fatigue and durability behavior of RC beams strengthened with CFRP under hot-wet environment

Durability Experimental Method of RC Components Strengthened with FRP in Hot-Wet Environment

Test on Flexural Performance of RC Bridge Member after Overload Reinforced with Externally Bonded FRP

Fatigue Crack Propagation Behavior of RC Beams Strengthened with CFRP under High Temperature and High Humidity Environment

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Effects on the fatigue lives of RC beams strengthened with CFL at elevated temperature under cyclic bending loads

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Research on the Fatigue Flexural Performance of RC Beams Attacked by Salt Spray

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Fatigue performance of RC beams strengthened with non-prestressed and prestressed BFRP grids

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

An experimental study on fatigue debonding growth of RC beams strengthened with prestressed CFRP plates

Fatigue Behaviour of Steel Elements Strengthened with Stand CFRP Sheets

On the Experimental Method for Durability Measurement of RC Members Strengthened with FRP Served in Hot and Humid Environments

Fatigue life prediction for design of steel beams strengthened with CFRP

ANALYSIS OF FATIGUE LIFE OF CONCRETE BEAMS REINFORCED WITH PRESTRESSED CFRP SHEETS

Fatigue behaviour of the bond interface between carbon fibre‐reinforced polymer sheets and concrete

Flexural Performance and Thermomechanical Coupling Analysis of Full-Iron Tailings Reinforced Concrete Beams

Influence of Humidity on Fatigue Performance of CFRP: A Molecular Simulation

Fatigue behavior and calculation methods of high strength steel fiber reinforced concrete beam