Abstract:Abstract In order to solve the problem that steel corrosion seriously limits the service life of bridges, predecessors put forward the measure of using carbon fiber reinforced composite bar (CFRP) as stress bar. In order to study the static performance, fatigue performance and damage development of CFRP ribs, the static loading test of two mixed reinforced beams with different reinforcement ratios was carried out based on the static load test of pure reinforced concrete beams through three-point concentrated loading. The test results show that the CFRP rib beam works by the development process of balanced crack extension and fiber rupture; the deflection and strain of the test beam increase significantly in the initial stage of cyclic loading; as the number of load cycles increases, the crack growth rate becomes slower. And entering a relatively stable stage of development, and a large increase in the vicinity of the destruction; Under the same reinforcement ratio, the static load limit of composite reinforced beams is 0.95 times of that of pure reinforced concrete beams; the static load limit of 2FRP beams is 50% of that of 3FRP beams, but the fatigue life of 2FRP beams is 75 times of that of 3FRP beams. It can be seen that appropriate reinforcement ratio can effectively improve the service life of specimens. On the basis of the test, some suggestions on the design of CFRP reinforced concrete beams are put forward. The research results can be used for reference in the follow-up study.

ANALYSIS OF FATIGUE LIFE OF CONCRETE BEAMS REINFORCED WITH PRESTRESSED CFRP SHEETS

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Fatigue life prediction for design of steel beams strengthened with CFRP

Fatigue Behaviour of Steel Elements Strengthened with Stand CFRP Sheets

Study on Fatigue Performance of Reinforced Concrete Beams Strengthened with BFRP Sheet

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Analysis and calculating method of flexural capacity of RC T-beams strengthened with prestressed CFRP sheets

Study on the stiffness degradation in concrete continuous beam with externally prestressed CFRP tendons under fatigue loading

STUDY ON FATIGUE BEHAVIOR OF CRACKED TENSILE STEEL PLATES REINFORCED WITH CFRP PLATES

Fatigue behavior and calculation methods of high strength steel fiber reinforced concrete beam

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Experimental study on static and fatigue properties of CFRP reinforced concrete beams

Fatigue behaviour of the bond interface between carbon fibre‐reinforced polymer sheets and concrete

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

Finite Element Analysis for the Fatigue Behavior of Steel Plates Strengthened with CFRP Plates

Analysis on Stress and Short-term Flexural Stiffness of Strengthened RC Beam Prestressed with CFRP Sheets

ANALYSIS OF MAXIMUM TENSIONED PRESTRESS AND INTERFACIAL BOND STRESS OF PRESTRESSED CFRP SHEETS

EXPERIMENTAL STUDY ON T-REINFORCED CONCRETE BEAMS STRENGTHENED WITH PRESTRESSED CFRP SHEETS

A PRACTICAL METHOD OF ULTIMATE FLEXURAL CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP PLATES

Fatigue life prediction of fiber reinforced concrete under flexural load

STRUCTURAL BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE BEAMS FLEXURAL STRENGTHENED WITH CFRP SHEETS UNDER MONOTONIC AND FATIGUE LOADING