Abstract:The external bonding (EB) of fiber-reinforced polymer (FRP) is a usual flexural reinforcement method. When using the technique, premature debonding failure still remains a factor of concern. The effect of incorporating multi-wall carbon nanotubes (MWCNTs) in epoxy resin on the flexural behavior of reinforced concrete (RC) beams strengthened with basalt fiber-reinforced polymer (BFRP) sheets was investigated through four-point bending beam tests. Experimental results indicated that the flexural behavior was significantly improved by the MWCNT-modified epoxy. The BFRP sheets bonded by the MWCNT-modified epoxy more effectively mitigated the debonding failure of BFRP sheets and constrained crack development as well as enhanced the ductility and flexural stiffness of strengthened beams. When the beam was reinforced with two-layer BFRP sheets, the yielding load, ultimate load, ultimate deflection, post-yielded flexural stiffness, energy absorption capacity and deflection ductility of beams strengthened using MWCNT-modified epoxy increased by 7.4%, 8.3%, 18.2%, 22.6%, 29.1% and 14.3%, respectively, in comparison to the beam strengthened using pure epoxy. It could be seen in scanning electron microscopy (SEM) images that the MWCNTs could penetrate into concrete and their pull-out and crack bridging consumed more energy, which remarkably enhanced the flexural behavior of the strengthened beams. Finally, an analytical model was proposed for calculating characteristic loads and characteristic deflections of RC beams strengthened with FRP sheets, which indicated a reasonably good correlation with the experimental results.

Study on Fatigue Performance of Reinforced Concrete Beams Strengthened with BFRP Sheet

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Experimental Study of Flexural Behavior of RC Beams Strengthening with BFRP Sheets

Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Fatigue performance of RC beams strengthened with non-prestressed and prestressed BFRP grids

Flexural Performance of Concrete Beams Reinforced with Continuous FRP Bars and Discrete Steel Fibers under Cyclic Loads

Experimental study on the flexural deflections of concrete beam reinforced with Basalt FRP bars

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

Experimental study on static and fatigue properties of CFRP reinforced concrete beams

FEM Analysis of New-Type BFRP Reinforced Concrete Beams' Mechanical Properties

Study of the Mechanical Performance of Grid-Reinforced Concrete Beams with Basalt Fiber-Reinforced Polymers

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Fatigue performance of basalt fibre-reinforced polymer bar-reinforced sea sand concrete slabs

ANALYSIS OF FATIGUE LIFE OF CONCRETE BEAMS REINFORCED WITH PRESTRESSED CFRP SHEETS

Flexural Response of Concrete Beams Reinforced with Steel and Fiber Reinforced Polymers

Enhancing Flexural Behavior of Reinforced Concrete Beams Strengthened with Basalt Fiber-Reinforced Polymer Sheets Using Carbon Nanotube-Modified Epoxy

Deflection calculating method of damaged concrete beams strengthened with BFRP

Flexural Performance of RC Beams Strengthened with Polyester FRP Composites