Abstract:Among a variety of fiber sensors, the fiber Bragg grating (FBG) sensor has numerous advantages over other optical fiber sensors. One of the major advantages of this type of sensors is attributed to wavelength-encoded information given by the Bragg grating. Since the wavelength is an absolute parameter, signal from FBG may be processed such that its information remains immune to power fluctuations along the optical path. This inherent characteristic makes the FBG sensors very attractive for application in smart material structure, health monitoring field et al. But FBG sensors are sensitive to temperature and strain simultaneously; it is necessary to analyze the characteristics of temperature and strain of FBG applied for smart structure. Short overview of the FBG sensing principle as well as theoretical analyses is presented at first; then the paper proposes a simple, convenient, and low cost experimental method to verify the performance of FBGs. The improved high-accuracy experimental instrument of thermal deformation, which consists of an accurate temperature controlling and measuring subsystem, supporting and adjusting subsystem, collimating and positioning subsystem and fine motion and measuring sub-system, is simply introduced. The proposed experimental method involves bonding one uniform FBG to the center of the pole, which is about 89.5mm long; another FBG temperature sensor is free in the temperature-control box. The temperature in the box is -20°C-+50°C is adjusted according to experimental schedule. The characteristics of the FBG are analyzed by actual datum, which are simultaneously collected by a PC through a FBG interrogator. Comparing the data of FBG bonded to the pole with another FBG temperature sensor in the free state, the characteristics of the temperature and the thermal strain of the FBG can be obtained. The experimental result shows the FBGs used to the smart material have good agreement characteristics with theoretical calculation of the FBGs.

Simulation and Experiment of Packaging of the Fibre Bragg Grating Sensors Using Brazing/Soldering Methods

Packaging Effects on Fiber Bragg Grating Sensor Performance

A novel packaging method for FBG temperature sensors based on ultrasonic-assisted soldering technology

Fiber Bragg Grating Online Packaging Technology Based on 3D Printing

Study on the Strain and Temperature Densing Characterist ics of FBG Packaged by the Copper slice

Simulation of Fiber Bragg Grating Using Different Physical Parameters for Investigating the Effectiveness on Strain Sensor Measurements

Fiber Bragg Grating Packaged Temperature Sensor Without Exterior Load Affection

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

A Temperature Compensation Method for Fiber Bragg Gratings Using Negative Thermal Expansive β-Eucryptite Packaging

An Electroplating Method for Surface Mounting Optical Fiber Sensors on the Metal Substrate

Performance Analysis and Experimental Verification for Fbg Sensors Applied for Smart Structure

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Sensitivity Enhancement of Long-gage FBG Sensors for Macro-strain Measurements

Temperature and strain characteristic analysis of fiber Bragg grating sensor

Strain Transfer Mechanism of Quadrate-Packaged FBG Sensors Embedded in Rectangular Structures

Study on packaging technique of fiber Bragg grating

Investigation on Temperature Sensitivity of Fiber Bragg Grating Sensor under Global Temperature Variations Experience

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Design of micro FBG strain sensor with enhanced sensitivity