Abstract:Nanocrystalline aluminum nitride (AlN) thin films were deposited on two types of metallic seed layers on silicon substrates, (111) textured Pt and (110) Mo, by reactive DC magnetron sputtering at low temperature (200 degrees C). Both textured films of Pt and Mo promote nucleation, thereby improving the crystallinity and epitaxial growth condition for AlN thin films. The deposited films were examined by X-ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The results indicated that the preferred orientation of crystallites greatly depends upon the kinetic energy of the sputtered species (target power) and seed layers used. Furthermore, AlN thin films with c-axis perpendicular to the substrate grew on both types of metal electrodes at all power levels larger than 100W. By comparing the structural properties and compressive stresses at perfect c-axis orientation conditions, it is evident that AlN films deposited on (110) oriented Mo substrates exhibited superior properties as compared with Pt/Ti seed layers. Furthermore, less values of compressive stresses (-3GPa) as compared with Pt/Ti substrates (-7.08GPa) make Mo preferentially better candidate to be employed in the field of suspended Micro/Nano - electromechanical systems (MEMS/NEMS) for piezoelectric devices. Copyright (c) 2017 John Wiley & Sons, Ltd.

Influence of pressure on the properties of AlN deposited by DC reactive magnetron sputtering on Si (100) substrate

Preparation of AIN Thin Film by DC Sputtering on SiO2/Si and Analysis of Microstructure

Influence of sputtering parameters on structures and residual stress of AlN films deposited by DC reactive magnetron sputtering at room temperature

Morphological Properties of AlN Piezoelectric Thin Films Deposited by DC Reactive Magnetron Sputtering

AlN films prepared on 6H-SiC substrates under various sputtering pressures by RF reactive magnetron sputtering

Influence of Substrate Temperature on Structural Properties and Deposition Rate of AlN Thin Film Deposited by Reactive Magnetron Sputtering

Studies on the Effects of the Different Substrates on the Structures of AlN Thin Films

Effects of Sputtering Pressure on Microstructure and Secondary Electron Emission Properties of AlN Film Prepared by Magnetron Sputtering

Effect of nitrogen pressure on the properties of AlN films grown on nitrided Al(111) substrates by pulsed laser deposition

AlN Thin Films Deposited on Different Si-based Substrates Through RF Magnetron Sputtering

Deposition of AIN Thin Films on Silicon by DC Magnetron Reactive Sputtering

Residual Stress of AlN Films RF Sputter Deposited on Si(111) Substrate

Studies of the Structure and Surface Roughness of AlN Thin Films

Influence Of Metal Electrodes On C-Axis Orientation Of Aln Thin Films Deposited By Dc Magnetron Sputtering

Preparation of Aln Thin Films for Film Bulk Acoustic Resonator Application by Radio Frequency Sputtering

Growth of AIN Films by RF Reactive Magnetron Sputtering for Film-Bulk-Acoustic-Wave-Resonator Fabrication

Influence of N2 Partial Pressure on Mechanical Properties of (ti,al)n Films Deposited by Reactive Magnetron Sputtering

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive DC magnetron sputtering

The Preparation of Scaln(002) Alloy Thin Films Deposited on Si(100) Substrates by Dc Reactive Magnetron Sputtering

Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering

Study of preparation of AlN Thin Films for FBAR Application by RF Sputtering