Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Excellent Electrochemical Properties of Graphene-Like Carbon Obtained from Acid-Treating Natural Black Talc As Li-ion Battery Anode

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Coal-derived Synthetic Graphite with High Specific Capacity and Excellent Cyclic Stability As Anode Material for Lithium-Ion Batteries

Preparation of Onion-like Synthetic Graphite with a Hierarchical Pore Structure from Anthracite and Its Electrochemical Properties as the Anode Material of Lithium-Ion Batteries

Purification and Carbon-Film-Coating of Natural Graphite As Anode Materials for Li-Ion Batteries

Investigation of PF6(-) and TFSI(-) anion intercalation into graphitized carbon blacks and its influence on high voltage lithium ion batteries

Bean-dreg-derived Carbon Materials Used As Superior Anode Material for Lithium-Ion Batteries

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials

Preparation and Characterization of Nano-Sized FeTaO4/graphite for Lithium-Ion Batteries

Modified Natural Flake Graphite with High Cycle Performance As Anode Material in Lithium Ion Batteries

Surface modification of graphite anode in lithium ion battery

Anthracite-derived carbon-based electrode materials for high performance lithium ion capacitors

Effect of Carbon Coating on Electrochemical Performance of Treated Natural Graphite as Lithium-Ion Battery Anode Material

Tannin-Derived Hard Carbon for Stable Lithium-Ion Anode

Surface fluorinated graphite suppressing the lithium dendrite formation for fast chargeable lithium ion batteries

Direct Synthesis of Fluorinated Carbon Materials via a Solid‐State Mechanochemical Reaction Between Graphite and PTFE

Enhanced Rate Capability and Low-Temperature Performance of Li 4 Ti 5 O 12 Anode Material by Facile Surface Fluorination.

Enhanced Rate Performance of Li4Ti5O12 Anode for Advanced Lithium Batteries

A Tunable Molten-Salt Route for Scalable Synthesis of Ultrathin Amorphous Carbon Nanosheets as High-Performance Anode Materials for Lithium-Ion Batteries

Boosted electrochemical performance of graphite anode enabled by polytetrafluoroethylene-derived F-doping