Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bean-dreg-derived Carbon Materials Used As Superior Anode Material for Lithium-Ion Batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Wheat Bran Derived Carbon Toward Cost-Efficient and High Performance Lithium Storage

Controlled Synthesis of Ultrafine β-Mo2C Nanoparticles Encapsulated in N-Doped Porous Carbon for Boosting Lithium Storage Kinetics

Fabrication of 2D Cu-BDC MOF and its derived porous carbon as anode material for high-performance Li/K-ion batteries

Coal-derived Synthetic Graphite with High Specific Capacity and Excellent Cyclic Stability As Anode Material for Lithium-Ion Batteries

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Interconnected Sandwich Structure Carbon/Si-Sio2/Carbon Nanospheres Composite As High Performance Anode Material for Lithium-Ion Batteries

B‐Doped Carbon Coating Improves the Electrochemical Performance of Electrode Materials for Li‐Ion Batteries

Waste catkins-derived graphitic carbon/Co3O4 composites as long-life and high-rate anodes for lithium-ion battery

Tannin-Derived Hard Carbon for Stable Lithium-Ion Anode

Surface Modifications of Carbon Materials Used As Anode of Lithium Ion BatteryⅡ.The Carbon Material with Core Shell Structure and Its Positive Effect on Cell Performance of Graphite Anode

Carbon-coated Li4Ti5O12–TiO2 Microspheres As Anode Materials for Lithium Ion Batteries

Bimetal-Organic-Framework Derivation of Ball-Cactus-Like Ni-Sn-P@C-CNT As Long-Cycle Anode for Lithium Ion Battery

Hard Carbon Derived from Graphite Anode by Mechanochemistry and the Enhanced Lithium‐Ion Storage Performance

Nitrogen-Doped Hollow Carbon Nanospheres for High-Performance Li-Ion Batteries.

Honeycomb-shaped Carbon Particles Prepared from Bicycle Waste Tires for Anodes in Lithium Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Carbon-coated Silicon Nanotube Arrays on Carbon Cloth As a Hybrid Anode for Lithium-Ion Batteries

Dopamine-Derived Graphite-Like Hard Carbon Materials for High-Performance Li+ Ions Storage

The Optimized Tin Dioxide-Carbon Nanocomposites As High-performance Anode for Lithium Ion Battery with a Long Cycle Life