Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosted electrochemical performance of graphite anode enabled by polytetrafluoroethylene-derived F-doping

Superior lithium storage in Fe<sub>2</sub>O<sub>3</sub> nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Removing electrochemical constraints on polytetrafluoroethylene as dry-process binder for high-loading graphite anodes

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Promoting the Normal- and Low-Temperature Performances of Natural Graphite by the F-Doping Derived from PVDF Modification

A synergistic effect of lithium titanate/pristine graphene composite with enhanced lithium storage capability

One-Step Fabrication of Fluorine-Doped Graphite Derived from a Low-Grade Microcrystalline Graphite Ore for Potassium-Ion Batteries

Understanding the Improved Fast Charging Performance of Graphite Anodes with a Fluoroethylene Carbonate Additive by In Situ NMR and EPR

Surface fluorinated graphite suppressing the lithium dendrite formation for fast chargeable lithium ion batteries

Preparation and Characterization of Nano-Sized FeTaO4/graphite for Lithium-Ion Batteries

Tuning the Graphitization of the Carbon Coating Layer on LiFePO4 Enables Superior Properties

Direct Synthesis of Fluorinated Carbon Materials via a Solid‐State Mechanochemical Reaction Between Graphite and PTFE

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Acid-base encapsulation prepared N/P co-doped carbon-coated natural graphite for high-performance lithium-ion batteries

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Mesoporous carbon-coated LiFePO4 nanocrystals co-modified with graphene and Mg2+ doping as superior cathode materials for lithium ion batteries

Revisiting Polytetrafluorethylene Binder for Solvent-Free Lithium-Ion Battery Anode Fabrication

Mitigating PTFE decomposition in ultra thick dry-processed anodes for high energy density lithium-ion batteries

Graphite-Embedded Lithium Iron Phosphate for High-Power-Energy Cathodes

High Electrochemical Performance of Nanocrystallized Carbon-Coated LiFePO4 Modified by Tris(pentafluorophenyl) Borane As a Cathode Material for Lithium-Ion Batteries