Abstract:The conventional graphite anode is still insufficient to meet the demand due to its low theoretical specific capacity(372 mAhg-1). Compared to the graphite, the high surface-to-volume ratio and open porous system of graphene shows great advantages:i) fast ion transport enabling the high rate capability, which is an obstacle for graphite with microsize bulk lithium diffusion; ii) the large surface areas of graphene can provide more electrochemical reaction active sites for energy storage. Meanwhile, Graphene is an excellent substrate to host active nanomaterial for energy applications due to its high conductivity, large surface area, structural flexibility, and chemical stability.1,2Overall, the superior electronic conductivity and mechanical properties of graphene make it suitable for fabrication into high-performance composites with other anode materials for LIBs. Recently, Alloy-type anodes (Si, Ge, Sn, Sb, etc.) have attracted much attention due to their higher Li storage capacity than the graphite anode that is currently used in Li-ion batteries. Compared with the silicon etc., Germanium has high theoretical capacity (1384 mAh/g), good lithium diffusivity (400 times faster than in silicon), and high electrical conductivity (104 times higher than silicon).3 However, the practical usage of Ge as an anode material is hindered by dramatic volume changes (∼300%) caused by insertion/extraction of lithium ions, which results in crack and pulverization, and loss of electrode contact.4 Herein, we developed a facile synthesis method (solution-phase reactions) to form hybrid materials of amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on reduced grapheme oxide (RGO) sheets for lithium ion battery applications. The high rate performance of mesoporous GeOx/RGO composite is attributed to (1) the amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on conducting RGO stabilize the cycling performance and rate capability; (2)fast charge transfer reaction at the large interfacial area of RGO between hybrid electrode and liquid electrolyte. Acknowledgements This work is supported by the Project of the Ningbo 3315 International Team of Advanced Energy Storage Materials, China Postdoctoral Science Foundation funded project. References: Yoo, E., et al.Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Letters. 2008.8(8): 2277-2282. Xiang, H. F., et al. Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage.Rsc Advances 2012. 2(17): 6792-6799. Wang, X. L., et al. Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life. Journal of the American Chemical Society 2011. 133(51): 20692-20695 Yuan, F. W., et al. Alkanethiol-Passivated Ge Nanowires as High-Performance Anode Materials for Lithium-Ion Batteries: The Role of Chemical Surface Functionalization. Acs Nano 2012. 6(11): 9932-9942.

Preparation of Onion-like Synthetic Graphite with a Hierarchical Pore Structure from Anthracite and Its Electrochemical Properties as the Anode Material of Lithium-Ion Batteries

Preparation and lithium storage of anthracite-based graphite anode materials

Eco-conversion of coal into a nonporous graphite for high-performance anodes of lithium-ion batteries

A new strategy for preparation of high-performance onion-like anode material from coal tar pitch residue

Porous Three-Dimensional Activated Microwave Exfoliated Graphite Oxide As an Anode Material for Lithium Ion Batteries

Electrochemical performance of expanded graphite prepared from anthracite via a microwave method

Amorphous Hierarchical Porous GeO X /reduced Graphene Oxide Composite As a High-Performance Anode Material for Lithium Ion Batteries

Ultrafast transformation of natural graphite into self-supporting graphene as superior anode materials for lithium-ion batteries

Unraveling the Relationship between the Mineralogical Characteristics and Lithium Storage Performance of Natural Graphite Anode materials

Preparation of Anode Material for Lithium Ion Battery by Chemical Oxidation

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Purification and Carbon-Film-Coating of Natural Graphite As Anode Materials for Li-Ion Batteries

Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Facile Preparation of Graphene/SnO₂ Xerogel Hybrids as the Anode Material in Li-Ion Batteries.

Facile synthesis of porous hollow Co3O4 microfibers derived-from metal-organic frameworks as an advanced anode for lithium ion batteries

Graphite As Anode Materials: Fundamental Mechanism, Recent Progress and Advances

Purification of spent graphite and surface modification with amorphous carbons as anodes for high-performance lithium-ion batteries

Nitrogen-Doped Porous Co3O4/Graphene Nanocomposite for Advanced Lithium-Ion Batteries

The mechanistic exploration of porous activated graphene sheets-anchored SnO2 nanocrystals for application in high-performance Li-ion battery anodes.

Theoretical and Experimental Performance Characterization of Battery Anodes Comprised of Coal Derived Graphite