Abstract:Pyroelectric materials, are those materials with the property that in the absence of any externally applied electric field, develop a built-in spontaneous polarization in their unit cell structure. They are regarded as ideal detector elements for infrared applications because they can provide fast response time and uniform sensitivity at room temperature over all wavelengths. Crystals of the perovskite Lead Titanate (PbTiO3) family show pyroelectric characteristics and undergo structural phase transitions. They have a high Curie temperature (the temperature at which the material changes from the ferroelectric (polar) to the paraelectric (nonpolar) phase), high pyroelectric coefficient, high spontaneous polarization, low dielectric constant, and constitute important component materials not only useful for infrared detection, but also with vast applications in electronic, optic, and Micro-electromechanical systems (MEMS) devices. However, the preparation of large perfect, and pure single crystals of PbTiO3 is challenging. Additionally, difficulties arise in the application of such bulk crystals in terms of connection to processing circuits, large size, and high voltages required for their operation. A number of thin film fabrication techniques have been proposed to overcome these inadequacies, among which, magnetron sputtering has demonstrated many potentials. By addressing these aspects, the review article aims to contribute to the understanding of the challenges in the field of pyroelectric materials, highlight potential solutions, and showcase the advancements and potentials of pyroelectric perovskite series including PbZrTiO3 (PZT), PbxCa1-x (PZN-PT), etc. for which PbTiO3 is the end member. The review is presented in two parts. Part 1 focuses on material aspects, including preparation methods using magnetron sputtering and material characterization. We take a tutorial approach to discuss the progress made in epitaxial growth of lead titanate-based ceramics prepared by magnetron sputtering and examine how processing conditions may affect the crystalline quality of the growing film by linking to the properties of the substrate/buffer layer, growth substrate temperature, and the oxygen partial pressure in the gas mixture. Careful control and optimization of these parameters are crucial for achieving high-quality thin films with desired structural and morphological characteristics.

Preparation and Characterization of Lead Zirconate Titanate Thin Films Grown by RF Magnetron Sputtering for Pyroelectric Infrared Detector Arrays

Preparation of PZT Thick Film by a High Speed Sol-gel Method

Properties Of Pbtio3, La-Modified Pbtio3 And Pb(Zr,Ti)O-3 Thin Films And Their Application To Infrared Detectors

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Microstructures And Pyroelectric Properties Of Multicomposition 0.9pbzro(3)Center Dot Xpbtio(3)Center Dot(0.1-X)Pb(Zn1/3nb2/3)O-3 Ceramics

Properties of multi-layered PZT films

Magnetron Sputtered Lead Titanates Thin Films for Pyroelectric Applications: Part 1: Epitaxial Growth, Material Characterization

Magnetron-Sputtered Lead Titanate Thin Films for Pyroelectric Applications: Part 2—Electrical Characteristics and Characterization Methods

Pyroelectric Performance, Dielectric Response and Conductive Mechanism of BCHT Lead-Free Piezoelectric Ceramics Via Powder Injection Molding

Pulsed Excimer Laser Deposition and Rapid Thermal Annealing of Ferroelectric Pb(Zr0.52Ti0.48)O3 Thin Films on Si-on-Insulator

Pyroelectric Ceramics in PbZrO<sub>3</sub>-PbTiO<sub>3</sub>-Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> System Prepared with Spark Plasma Sintering Technique

Preparation of Pb(Zr0.52Ti484848)O3 Thin Films on Silicon-on-insulator Substrates by Excimer Laser Deposition Combined with Rapid Thermal Annealing

Preparation of Pb(Zr<sub>0.52</sub>Ti484848)O<sub>3</sub> thin films on silicon-on-insulator substrates by excimer laser deposition combined with rapid thermal annealing

Preparation of Pb(Zr0.52Ti0.48)O3 thin films on silicon-on-insulator substrates by excimer laser deposition combined with rapid thermal annealing

Pyroelectric Ceramics In Pbzro3-Pbtio3-Pb(Zn1/3nb2/3)O-3 System Prepared With Spark Plasma Sintering Technique

Characterization of Pb(Zr,Ti)O-3 Thin-Films on Soi Prepared by Excimer-Laser Deposition

Growth and Characterization of Lead Zirconate Titanate (PZT) Thin Films

The structure and infrared absorption diagnostics of PZT thin films

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Study of the quasi-single crystalline lead sulfide film deposited by magnetron sputtering and its infrared detecting characteristics

Preparation and Crystallization of Pb(Zr0.95Ti0.05)O3 Thin Films Deposited by Radio-Frequency Magnetron Sputtering with a Stoichiometric Ceramic Target