Abstract:Braiding is an attractive manufacturing method for tubular elements such as hollow shafts and struts. One of the main challenges however is the integration of suitably performing end-fittings. Recent advances in additive layer manufacture have enabled the fabrication of end-fittings which can be ‘co-impregnated’ or ‘co-cured’ with the fibre preform in a single step, i.e. without the need for secondary adhesive bonding. This requires the introduction of protrusions onto the surface of the end-fitting to promote mechanical interlocking with the fibres. However, the lack of accurate modelling tools for the simulation of this manufacturing process means that much empiricism is currently used in the design of such structures. A novel numerical framework is presented here for the full-scale simulation of the braiding process over structured end-fittings. Nonlinear finite element analysis is applied at the meso-scale, with strands of beam elements representing individual yarns and meshed surfaces modelling the mandrel and tooling. Penalty-based contact formulations are then used to simulate all inter-yarn and yarn-metal interactions, enabling detailed predictions of fibre paths around surface protrusions. In order to verify and validate this numerical framework, a series of full-scale braiding experiments was conducted using additively-manufactured thermoplastic mandrels. Final braid patterns as well as the occurrence of braid imperfections were investigated and compared to model predictions. It is shown that the proposed modelling strategy reproduces well the trends observed experimentally in terms of final braid quality. A parametric study was then conducted on the effects of initial end-fitting alignment with respect to oncoming yarns, suggesting that better control over this parameter could reduce considerably the occurrence of braid imperfections.

Numerical Prediction Methodology for Tow Orientation on Irregular Mandrels with Constant Cross-Sections

Numerical prediction of effect of filling flow on short fiber orientation in injection molding

Braiding Angle Control Based on Traction Speed Correction for Circular Braiding

Trajectory Planning of Robot Considering Variation of Convergence Zone Length in Circular Braiding System

Non-Axisymmetric Overbraiding Process Modeling Based on Enhanced Kinematic Models

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

A Methodology to Obtain the Accurate RVEs by a Multiscale Numerical Simulation of the 3D Braiding Process

A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts

Track design and realization of braiding for three-dimensional variably shaped cross-section preforms

Experimental and numerical studies on the braiding of carbon fibres over structured end-fittings for the design and manufacture of high performance hybrid shafts

Theoretical analysis of braiding strand trajectories and simulation of three-dimensional parametric geometrical models for multilayer interlock three-dimensional tubular braided preforms

Research on effects of braiding process on the composite preform quality using finite element method

Nonlinear Mechanical Property of 3D Braided Composites with Multi-Types Micro-Distortion: A Quantitative Evaluation

Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

Prediction of elastic properties of 3D4D rotary braided composites with voids using multi-scale finite element and surrogate models

Multi-scale modeling and elastic properties prediction of 3D four-directional tubular braided composites

Novel processing technology and mesoscopic geometric modeling of a new three-dimensional (3D) braided composite and the study on its longitudinal mechanical properties

Generation of Geometric Structure of Composite Material Composed of Braiding Yarns

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform

A Methodology for Modeling the Relationship Between Process and Topological Yarn Structure of 3D Rotary Braided Rectangular Preforms