Abstract:Braiding is an attractive manufacturing method for tubular elements such as hollow shafts and struts. One of the main challenges however is the integration of suitably performing end-fittings. Recent advances in additive layer manufacture have enabled the fabrication of end-fittings which can be ‘co-impregnated’ or ‘co-cured’ with the fibre preform in a single step, i.e. without the need for secondary adhesive bonding. This requires the introduction of protrusions onto the surface of the end-fitting to promote mechanical interlocking with the fibres. However, the lack of accurate modelling tools for the simulation of this manufacturing process means that much empiricism is currently used in the design of such structures. A novel numerical framework is presented here for the full-scale simulation of the braiding process over structured end-fittings. Nonlinear finite element analysis is applied at the meso-scale, with strands of beam elements representing individual yarns and meshed surfaces modelling the mandrel and tooling. Penalty-based contact formulations are then used to simulate all inter-yarn and yarn-metal interactions, enabling detailed predictions of fibre paths around surface protrusions. In order to verify and validate this numerical framework, a series of full-scale braiding experiments was conducted using additively-manufactured thermoplastic mandrels. Final braid patterns as well as the occurrence of braid imperfections were investigated and compared to model predictions. It is shown that the proposed modelling strategy reproduces well the trends observed experimentally in terms of final braid quality. A parametric study was then conducted on the effects of initial end-fitting alignment with respect to oncoming yarns, suggesting that better control over this parameter could reduce considerably the occurrence of braid imperfections.

Braiding Angle Control Based on Traction Speed Correction for Circular Braiding

Trajectory Planning of Robot Considering Variation of Convergence Zone Length in Circular Braiding System

Traction control of space tubular shaped mandrel and detection of preform braiding angle

Non-Axisymmetric Overbraiding Process Modeling Based on Enhanced Kinematic Models

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Numerical Prediction Methodology for Tow Orientation on Irregular Mandrels with Constant Cross-Sections

Design and analysis of three-dimensional braiding machine with track change interlocking

Time-delay Cooperative Control of Circumferential Yarn Implantation System for 3D Braiding Machine Using Novel Nonlinear Adaptive Gains

Non-Linear Dynamic Feature Analysis of a Multiple-Stage Closed-Loop Gear Transmission System for 3D Circular Braiding Machine

Development of a robot OLP system for the continuous motion control of a mandrel in the radial braiding process

Research on the Control Algorithms for Varying Velocity-ratio Section of Filament Winding Pipe

Generation of Geometric Structure of Composite Material Composed of Braiding Yarns

Design optimization of a three-dimensional hexagonal braiding technique

Track design and realization of braiding for three-dimensional variably shaped cross-section preforms

Experimental and numerical studies on the braiding of carbon fibres over structured end-fittings for the design and manufacture of high performance hybrid shafts

Yarn-guiding system based on servo control and crank-link mechanism

Braking angle control of loom spindle based on neuron-adaptive PID algorithm

Design of a new braiding device with 3D integral active yarn carrie