Abstract:Despite the excellent improvements in high fields resulting from the adoption of REBa2Cu3O x (REBCO)-coated conductors (CCs), the resulting stress and strain due to winding tension, cooling stress, and the screening-current-induced Lorentz force may lead to severe plastic deformation and degradation of superconductivity. Therefore, it is essential to understand the comprehensive electromechanical behavior and deformation mechanism of high-field REBCO magnets. In this paper, multistep finite element analysis is designed to simulate the electromechanical behavior of REBCO coils after the winding, coolingdown, and charging processes. All major constituent materials including the mandrel, CCs, cowinding reinforcement, and over-banding are considered in the mechanical models to emulate contact–separation behavior between them. In addition to contact nonlinearity, an intrinsic elastoplastic property is introduced to predict the plastic deformation observed in experiments. To reveal the screening-current effect, the distributions of the screening current and the magnetic field are analyzed by solving the T-A formulation of Maxwell’s equations using a homogeneous technique. Then, with the electromagnetic load acting as a body force, the electromagnetic stress and strain are computed and experimentally validated for a pancake coil, including the transport current and external field. Finally, the electromechanical behavior under a Lorentz load is investigated by considering the accumulation of stress and strain due to winding tension and cooling down. The simulation results reveal that the winding tension and thermal stress affect the final stressstates in the fully charged state and therefore the electromechanical properties. Both plastic deformation and possible degradation are more likely to occur in the outermost tape of several pancakes due to the influence of screening-current-induced stress and strain. In addition, this work further analyzes the effect of the current sweep reversal method, which could be favorable in reducing the screening-current-induced high stress and strain in the steady state.

Electro-Mechanical Behavior In Arrays Of Superconducting Tapes

Numerical analysis on electromagnetic and mechanical properties of the quasi-isotropic strand

Numerical Simulation of the Mechanical Behavior of Superconducting Tape in Conductor on Round Core Cable Using the Cohesive Zone Model

Electric-magnetic-force Characteristics of Rare Earth Barium Copper Oxide Superconductor High-Field Coils Based on Screening Effect and Strain Sensitivity

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

Numerical Analysis of the Electromechanical Behavior of High-Field REBCO Coils in All-Superconducting Magnets

Strain Effect on Critical Current Degradation in Bi-Based Superconducting Tapes with Different Deformation Modes

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

The Influence of Electromagnetic Vibration Caused by AC Current on the Performance of Y-Ba-Cu-O Tapes

Deformation Behavior of Stacked REBCO Tapes under Compressive Loads

Electromechanical Characteristic of Stacked REBCO Tapes under Tension Deformation

Strain Distribution and Critical Current Characteristics of an Individual REBCO Tape and Quasi-Isotropic Superconducting Strand Under Bending Loads by the Layerwise Theory

Numerical Simulations of Ac Losses in Multifilamentary Superconducting Tapes under Bending Strain

Experimental study on the an-isotropic critical current of REBCO tape

Magnetic properties of superconducting multifilamentary tapes in perpendicular field. II: Horizontal and matrix arrays

Critical Current Degradation Behaviour of Various REBCO Tapes under Uniaxial Strain

Mechanical Behavior in Superconducting Composite Wires

Long Lengths of Silver-Clad Bi2223 Superconducting Tapes with High Current-Carrying Capacity

A direct tensile device to investigate the critical current properties in superconducting tapes

Numerical Analysis of the Mechanical and Electrical Properties of (RE)BCO Tapes with Multiple Edge Cracks