Abstract:The transport performance of Nb3Sn cable-in-conduit conductors (CICCs) depends on the strain distribution along the superconducting filaments determined by the combination of electromagnetic and mechanical forces applied to the strands. The aim of this paper is to analyze the electromagnetic-mechanical coupling behavior of Nb3Sn strand by establishing a 3-D finite-element model. This model contains subdomains, which are air region, superconducting filaments, and metal matrix. The mechanical constitutive relations of superconducting filaments and metal matrix are described with elastic and elasto-plastic strain-stress experimental curve, respectively. For the voltage-current (V - I) characteristic, metal matrix elements follow the Ohmic law, and superconducting filaments are modeled with the n-power relation. Lorentz force in three directions (x, y, and z) caused by the external magnetic field and induced current are calculated. The current density and magnetic field distribution of strand are also computed, and the results show the filaments prevent a further field penetration from the outer into the interior matrix. The combination effect of the tensile force and Lorentz force on the strand is discussed. It can be found that Lorentz force combined with the tensile force makes the degradation obvious. The model provides a basis to analyze the electromagnetic-mechanical coupling behavior of the Nb3Sn strand and be able to predict the current flow patterns and magnetic field distribution.

Mechanical Behavior in Superconducting Composite Wires

Damage Behavior in Bi-2212 Round Wire with 3D Elastoplastic Peridynamic

Three-dimensional Multifilament Finite Element Models of Bi-2212 High-Temperature Superconducting Round Wire under Axial Load

Damage Analysis of Superconducting Composite Wire with Bridging Model

Electro-mechanical Behaviors of Composite Superconducting Strand with Filament Breakage

Stress–Strain Distribution Analysis in Bi2212 Subcable Based on Numerical Modeling and Experiment

Numerical Simulations of Ac Losses in Multifilamentary Superconducting Tapes under Bending Strain

Uniaxial Strain Induced Critical Current Degradation of Ag-Sheathed Bi-2212 Round Wire

The Axial Tensile Stress–Strain Characterization of Ag-Sheathed Bi2212 Round Wire

Estimation of Critical Current Distribution in Bi2Sr2CaCu2Oxcables and Coils Using a Self-Consistent Model

Degradation of Critical Current in Bi2212 Composite Wire under Compression Load

Analysis of Critical Current Density in Bi 2 Sr 2 CaCu 2 O 8+ X Round Wire with Filament Fracture

Degradation Mechanism of the Superconducting Performance of a Bi2212 Cable under Magnetic Fields

Non-destructive Evaluation of Critical Current on a Bi-2212 First Stage Cable Based on Numerical Analysis of the Remnant Field Distributions

Numerical estimation of AC losses in Bi2212/Ag wire and coil

A 3D Model on the Electromechanical Behavior of a Multifilament Twisted Nb 3 Sn Superconducting Strand

Nonlinear static and dynamic mechanical behaviors of Nb 3 Sn superconducting composite wire: experiment and analysis

Electromagnetic–Mechanical Coupling Analysis of Nb3Sn Superconducting Strand

Nonlinear static and dynamic mechanical behaviors of Nb<sub>3</sub>Sn superconducting composite wire: experiment and analysis

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Electro-Mechanical Behavior In Arrays Of Superconducting Tapes