Abstract:The performance of superconducting magnets is greatly dependent on the size and uniformity of the superconducting filaments within the wire. However, in the fabrication of Bi 2 Sr 2 CaCu 2 O x (Bi2212) wires using ceramic oxide as the superconducting filaments, we face multiple challenges including filament fragility, poor uniformity, and non-smooth Ag/superconductor interfaces. These challenges primarily stem from the significantly lower plastic deformation capability of ceramic oxide powder filaments compared to metal matrices. To address these challenges, this study focuses on the modification of ceramic oxide precursor powders. Through the utilization of low-temperature, low oxygen partial pressure ( p O 2 ) heat treatment, we have observed significant changes in the Cu chemical states and lattice parameters within the Bi2212 grains. These alterations have proven to be highly effective in reducing the energy required for grain sliding and, in turn, enhancing the plastic deformation properties of the Bi2212 oxide filament. Furthermore, post-annealing the oxide powder under low p O 2 conditions narrows the gap in plastic deformability between the Ag sheath and the oxide filaments, resulting in improved filament uniformity and a smoother Ag/oxide interface in Bi2212 wires. Notably, the Bi2212 grains exhibit an orderly arrangement within the wires. As a result of these improvements, the critical current density ( J c ) of the final wires increases by an impressive 70 %. The outcomes of this study are not only crucial for producing Bi2212 magnets with higher magnetic field strength, improved magnetic field uniformity, and enhanced operational stability, but also offer fresh insights and methodologies for advancing the field of superconducting materials.

Revealing the effect of bridges in the multi-filamentary Bi-2212 wires

Microstructure and Critical Current Density of Bi-2212 Single- and Multi-filamentary Wires with Overpressure Heat Treatment Processing

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

New concept for the development of Bi-2212 wires for high field applications

Interface effects on current transport properties in multi-layered (Ba, K)Fe2As2 superconducting wires

Improvement of plastic deformation property and current carrying capacity of Bi2212 wires through low oxygen partial pressure post-annealing of precursor

Development of persistent joints for superconducting Bi-2212 coils

Effects of Wire Properties on the Field-Tunable Behaviour of Continuous-Microwire Composites

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

Influence of Nb Morphology on the Structure and Properties of High Strength and High Conductivity Cu-Nb Composite Wires

Large critical current density improvement in Bi-2212 wires through groove-rolling process

Critical Current Distributions of Recent Bi-2212 Round Wires

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Improving Bi-2212 multi-filament wire quality and superconductivity by cryogenic drawing

Correlation of Magnetic Domains, Microstructure and Gmi Effect of Joule-Annealed Melt-Extracted Co68.15fe4.35si12.25b13.75nb1cu0.5 Microwires for Double Functional Sensors

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

Ic-B Characteristics of High-Temperature Superconducting Wires

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

Fabrication and study of thin Bi-2223 round wires

Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires