Abstract:Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a> and 0.02 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>) in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times (5 to 25 min). The irradiation has been achieved using laser beam of 2W power and 810 nm wavelength. We have studied the morphological and structural properties of PSi layers using the techniques of Xray Diffraction (XRD) and Scanning Electron Microscopy (SEM) and Gravimetric method. The Xray Diffraction data shows that the structure aspect of PSi layers remains crystalline as well as the decreasing of diffraction angle (thetaB) of Xray from PSi layers (29 to 26 degree) and increasing of the lattice parameter values of PSi structures with increasing of etching times from 5 to 25 min., and the resistivity of silicon substrates from 0.02 to 3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>. The nanocrystallite size is decreasing from (20.72 to 5.13 nm) with increasing of etching times, and the resistivity of silicon substrates. The SEM images shows that the values of pore width and PSi layer thickness increases from (0.5 to 6.25 micrometer) and (6.7 to 47 micrometer) respectively with increasing of etching times and silicon substrates resistivities, while the values of the thickness of walls between pores has been varied from (1.25 to 0.03 micrometer) with increasing of etching times and silicon substrates resistivities. The pore shape of pores has been varied from Cylindrical to Rectangular and to Starful with varied of etching conditions. Further the measured specific surface area of PSi layers has been increased from (7.43 to 235.35 m2/cm3) with increasing of etching times and silicon substrates resistivities.

Electrochemical Behavior of Porous and Flat Silicon Electrode Interfaces

Correlations of Electrochemical Behavior, Microstructure and Chemical Composition of Porous Silicon

Surface and Structure of Porous Silicon Layers

Porous silicon formation and electropolishing

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Effect of Etching Time on Porous Silicon Formation

Electrochemical Reactivity and Passivation of Silicon Thin-Film Electrodes in Organic Carbonate Electrolytes

I-V characterization study of porous silicon formation by doubled-cell electrochemical etching

EFFECT OF C-Si/electrolyte INTERFACE ON THE INITIAL STAGE OF POROUS SILICON FORMATION

Influence of Polarized Bias and Porous Silicon Morphology on the Electrical Behavior of Au-porous Silicon Contacts

Further Evidence for the Quantum Confined Electrochemistry Model of the Formation Mechanism of P−-Type Porous Silicon

Exploring the Influence of Solvents on Electrochemically Etched Porous Silicon Based on Photoluminescence and Surface Morphology Analysis

Al-assisted Anodic Etched Porous Silicon

Microstructures and Emission Characteristics of Porous Silicon Films

Porous Silicon Fabrication and Surface Cracking Behavior Research Based on Anodic Electrochemical Etching▴

Structure and surface control of porous silicon for sensor applications

Preparation Of Porous Silicon By Electrochemical Etching Methods And Its Morphological And Optical Properties

Morphological and Electrical Features of Porous Silicon Prepared by Metal-Induced Chemical Etching

Atomic Force Microscopic Studies of Light-Emitting Porous Silicon

Structural, Morphological and Electrical Properties of Porous Silicon Prepared Under Laser Illumination

A Mott-Schottky analysis of mesoporous silicon in aqueous electrolyte solution by electrochemical impedance spectroscopy