Abstract:Experimental method and results. Coated fabric is a composite textile consisting of fiber‐based cloth and surface coating. It features advantages such as lightweight, high strength, and multifunctionality, making it highly popular in architectural membrane structures. However, conventional coated fabrics have been facing bottlenecks such as short service life, difficult maintenance, and low dimensional stability. This paper introduces an innovative high‐performance PVC coated polyester named Flexlight Xtrem TX30, which possesses excellent longevity and durable aesthetics. The uniaxial tensile properties of three types of TX30 polyesters in the warp, weft, and 45° directions were comprehensively revealed through monotonic and cyclic tests. First, mono‐uniaxial tensile tests were performed on six specimens for each case. The failure characteristics were observed and strength at different angles was determined. Benefiting from the precontraint technology, the difference in strength between the warp and weft directions for TX30 is less than 5%. Second, uniaxial cyclic tensile tests were conducted on four specimens for each case. The initial tensile behavior exhibited the highest nonlinearity, with an R‐squared value greater than 0.999 for the cubic stress–strain relation. By the 15th cycle, the stiffness increment for all cases is less than 1%, indicating the attainment of material stabilization. Additionally, ratcheting effect and hysteresis loops were observed during the tests. The ratcheting strain and dissipated energy across different cases were thoroughly discussed and compared. In general, the experimental investigations in this study facilitate the understanding of the mechanical characteristics of the novel TX30 polyesters, providing insights for engineering applications and academic research. Highlights The uniaxial tensile properties of innovative TX30 polyesters were investigated. The failure mechanism and tensile strength at different angles were identified. The nonlinear stress–strain relations and cyclic material behaviors were determined.

Shear Properties of PVDF-Coated Fabrics under Multicyclic Biaxial Bias Extension

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Experimental studies on tear failure of PVC coated fabric

A Study on the Relationship Between the Crystal Structure and Hard Elasticity of PVDF Fibers

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Effects of stretching on crystalline phase structure and morphology of hard elastic PVDF fibers

Mechanical behavior of PVDF membrane based on the uni-/bi-axial loading experiments

Experimental Study on Pure-Shear-like Cyclic Deformation of VHB 4910 Dielectric Elastomer

Effect of Tackification on In-Plane Shear Behaviours of Biaxial Woven Fabrics in Bias Extension Test: Experiments and Finite Element Modeling

Measurement of meso-scale shear deformations for modelling textile composites

Experimental characterization for uniaxial tensile properties of high‐performance TX30 polyesters

Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests

Influence of the Unit Cell Parameters on the Thermomechanical Non-Symmetric In-Plane Shear Behavior of 2D Biaxial Braided Preform for Thermoplastic Biocomposites

Study on the shear-pretension coupling behavior of 3D uniform and variable thickness woven fabrics

Study on preparation, structure and properties of hard elastic PVDF fibers

Identification of Shear Properties for Woven Fiber Reinforced Polymer Simulation

Exploring in-plane shear characteristics of multilayer biaxial weft knitted fabrics through a micro-scale virtual fiber modeling

Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis

Bias extension test on an unbalanced woven composite reinforcement: Experiments and modeling via a second-gradient continuum approach

Biaxial tensile failure of short carbon-fibre-reinforced PEEK composites

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric