Abstract:We analyze several factors that affect the linear output range of CMOS image sensors, including charge transfer time, reset transistor supply voltage, the capacitance of integration capacitor, the n-well doping of the pinned photodiode (PPD) and the output buffer. The test chips are fabricated with 0.18 μm CMOS image sensor (CIS) process and comprise six channels. Channels B1 and B2 are 10 μm pixels and channels B3–B6 are 20 μm pixels, with corresponding pixel arrays of 1 × 2560 and 1 × 1280 respectively. The floating diffusion (FD) capacitance varies from 10 fF to 23.3 fF, and two different designs were employed for the n-well doping in PPD. The experimental results indicate that optimizing the FD capacitance and PPD design can enhance the linear output range by 37% and 32%, respectively. For larger pixel sizes, extending the transfer gate (TG) sampling time leads to an increase of over 60% in the linear output range. Furthermore, optimizing the design of the output buffer can alleviate restrictions on the linear output range. The lower reset voltage for noise reduction does not exhibit a significant impact on the linear output range. Furthermore, these methods can enhance the linear output range without significantly amplifying the readout noise. These findings indicate that the linear output range of pixels is not only influenced by pixel design but also by operational conditions. Finally, we conducted a detailed analysis of the impact of PPD n-well doping concentration and TG sampling time on the linear output range. This provides designers with a clear understanding of how nonlinearity is introduced into pixels, offering valuable insight in the design of highly linear pixels.

Effects of Capacitance Ratio on the Image Linearity of Capacitive Division Image Readout

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

Considerations and Optimization of Measurement Accuracy of Capacitance in Nano-Scale Cmos Technology

Redundancy Analysis of Capacitance Data of a Coplanar Electrode Array for Fast and Stable Imaging Processing

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

Analysis for Multiple-Electrode Excitation Method in Electrical Capacitance Tomography

Analysis and Optimization on Nonlinearity of CTIA Readout Circuit

A low-power high-linearity symmetrical readout circuit for capacitive sensors

The Effect of Pixel Design and Operation Conditions on Linear Output Range of 4T CMOS Image Sensors

Graphic Solution and Analysis of Voltage Distribution Between Ferroelectric Capacitor/Capacitors and Bitline Capacitance

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches

Effects of Bias Voltage Polarity on Differential Capacitive Sensitive Devices

Analysis and Characterization of Capacitance Variation Using Capacitance Measurement Array

Study on linearization of silicon capacitive pressure sensors

Effects of Electrostatic Forces Generated by the Driving Signal on Capacitive Sensing Devices

Optimisation strategy for coplanar array capacitance imaging in rotational scanning mode

A 2.5 Mw 370 Mv/pf High Linearity Stray-Immune Symmetrical Readout Circuit for Capacitive Sensors

Calibration Method for Improving the Linearity of Analog-to-digital Converters in CMOS Image Sensor

A Capacitive Force Transducer Structure with Improved Linearity

Linearity Analysis of Closed-Loop Capacitive Accelerometer Due to Distance Mismatch Between Plates and the Influence of Compensation Capacitor Array