Abstract:The impedance-based stability criterion (IBSC) is increasingly being researched and tested for the analysis and prognosis of harmonic stability or converter-driven stability. Due to the necessary division into two different subsystems for the application of the IBSC (e.g. depicting the grid and loads), frequency-dependent impedances representing the small-signal characteristics are necessary to model these subsystems. Load modeling is particularly necessary for grid-forming systems with active control loops (e.g. voltage-controlled inverters) since interactions between voltage-controlled and current-controlled components can occur. Due to a large number of systems and components as well as the related number of manufacturers in low-voltage grids, the extensive analytical modeling of all components and types is a challenge. A conceivable alternative is the experimental extraction of component impedances based on measurements of the terminal behavior. In this paper, a test bench is presented and used that includes different household appliances representing residential loads. These appliances are individually measured and the frequency-dependent impedances are extracted. From the extracted impedances, requirements are derived for the measurement and modeling. One key contribution of this paper is the analysis of the frequency resolution and the demonstration of advantages resulting from a regression-based calculation. It is shown that a linearly decreasing frequency resolution can be used, which can reduce the measurement time at the expense of accuracy. Furthermore, an approach to a black-box model parameter fitting is shown based on transfer functions with an a priori unknown model order. The results demonstrate that a model order can be found from which all measured household appliances can be modeled. In a final step, the individual impedances are analytically aggregated for larger grids into an equivalent impedance, and a sensitivity analysis is carried out by varying the individual penetration rates.

A Comparison Of Typical Non-Invasive Method For Utility Harmonic Impedance Estimation

A Power System Harmonic Impedance Assessment Method Considering Current＇s Fluctuation Characteristic

A Harmonic Impedance on Utility Side Estimation Method Based on Laplace Mixture Model

Non-Invasive Electromagnetic Sensor for Residential Harmonic Distortion

Harmonic Detection Method Based on IEC Standards and PSO Spectrum Estimation

A Practical Approach to Estimate Harmonic Distortions in Residential Distribution System

Evaluation of Harmonic Contributions for Multi Harmonic Sources System Based on Mixed Entropy Screening and an Improved Independent Component Analysis Method

Network Parameter Identification and Estimation Based on Hybrid Measurement of WAMS/SCADA

Data-Driven System-Side Harmonic Impedance Estimation Method for UHVDC Converter Station

Comparison of Harmonic Linearization and Harmonic State Space Methods for Impedance Modeling of Modular Multilevel Converter

A Noise Interference Suppression Method with Optimized Frequency Adjustment for Impedance Measurement

A Fluctuation Quantity Based Method to Evaluate Estimation Precision of Harmonic Impedance Amplitude at System Side

International Journal of Emerging Electric Power Systems Integrated Kalman-Independent Component Analysis Method for Harmonic Current Estimation on an Interconnected Four Bus Simulated and Laboratory Model

Perturbation Amplitudes Design Method Based on Confidence Interval Evaluation for Impedance Measurement

Quantification of harmonic pollution using non-fundamental apparent power

Research on Harmonic Characteristics of Electric Devices for Non-Intrusive Load Monitoring

Harmonic Phasor Estimation Based on Frequency-Domain Sampling Theorem

Extraction of frequency-dependent impedances of residential loads in low-voltage grids for harmonic stability assessment

Harmonic And Interharmonic Estimation Using Time-Domain Quasi-Synchronous Sampling Technique And Comb Fir Filter

Equivalence of Impedance Participation Analysis Methods for Hybrid AC/DC Power Systems

Time-varying harmonic analysis method based on adaptive frequency-shift filtering for power systems