Abstract:The nanowire gate-all-around (GAA) structures with the nearly ultimate channel electrostatic integrity of the gate field can exhibit the best immunity to the short channel effect and drain-induced barrier lowering. Moreover, owing to the enhanced control efficiency of gate over the tunneling junction, the GAA-TFET also gives improved subthreshold swing and on-state current. Despite the excellent device performance, an accurate model is very significant for the practical application. Compared with the numerical methods which are usually time consuming and computationally inefficient, an analytical model could accelerate the device investigation and circuit design process. Even though some tunneling current models have already been reported for nanowire tunneling field-effect-transistors (TFETs), the model of the terminal capacitance is still an issue for nanowire TFETs. The capacitance is of great significance for the transient simulation. In this paper, a physical and analytical potential model considering both the source depletion region and the channel mobile charges, is developed for the GAA-TFETs. The results from the model are verified with the numerical simulations, and the excellent agreement between the two results indicates the validation of the proposed model. Based on the potential model, the terminal charge model and the capacitance model are further developed and also verified by the numerical simulations. The main inflection and variation of the terminal charges and capacitances with the biases can be predicted by our model. Besides, both the model results and the numerical simulations both demonstrate that the gate charge is dominated mainly by the drain charges and the contribution of the source charges can be almost neglected. This also leads to the very small gate-source capacitance and very large Miller capacitance in the TFET device. This will be detrimental to the performance of TFET-based digital circuits but can be mitigated with the hetero-oxide gate structure. The second order effects, such as the quantum confinement and traps, are ignored in this paper and can be taken into the core model in the future work. It should also be noted that there is no iterative process involved during the model derivation, thus the developed model can be easily applied to the widely used SPICE platform and will be useful in designing and investigating the GAA-TFET based circuits.

Analytical Gate Fringe Capacitance Model for Nanoscale MOSFET with Layout Dependent Effect and Process Variations

Gate-To-Source/Drain Fringing Capacitance Model With Process Variation Of Mosfet In 40nm Generation

Extraction and Modeling of Layout-Dependent Mosfet Gate-To-Source/Drain Fringing Capacitance in 40 Nm Technology

Interface States in Gate Stack of Carbon Nanotube Array Transistors.

Modeling for Reduced Gate Capacitance of Nanoscale MOSFETs

3-D Modeling of Fringe Gate Capacitance in Complementary FET (CFET)

Capacitance Model for Nanowire Gate-All-around Tunneling Field-Effect-transistors

Predictive Modeling of Capacitance and Resistance in Gate-All-around Cylindrical Nanowire MOSFETs for Parasitic Design Optimization

Modeling of Gate Capacitance for Deep Sub-Micron Mosfets

Modeling of Gate Current and Capacitance in Nanoscale-MOS Structures

Analytical Capacitance Model for 14 Nm Finfet Considering Dual-K Spacer

A fringing-capacitance model for deep-submicron MOSFET with high-k gate dielectric

Fringe-Induced Barrier Lowering (fibl) Included Sub-Threshold Swing Model for Double-Gate Mosfets

Physical Analysis and Modeling of the Nonlinear Miller Capacitance for SiC MOSFET.

Parasitic Gate Capacitance Model for N-Stack Forksheet FETs

Analytical Model Including the Fringing-Induced Barrier Lowering Effect for a Dual-Material Surrounding-Gate MOSFET with a High-Κ Gate Dielectric

Modeling of Gate Current and Capacitance for Nanoscale MOSFETs with High-k Stacks

A Charge-Based Capacitance Model for Double-Gate Tunnel FETs With Closed-Form Solution

Parasitic Capacitance in Nanosheet FETs: Extraction of Different Components and Their Analytical Modeling

Modeling of Reduced Gate Capacitance of MOSFETs Accounting for Quantum Effects

Predictive 3-D modeling of parasitic gate capacitance in gate-all-around cylindrical silicon nanowire MOSFETs