Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

Kinetic parameter estimation and simulation of trickle-bed reactor for hydrodesulfurization of whole fraction low-temperature coal tar

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Study on the Preparation of Clean Liquid Fuel by Wide Fraction High-Temperature Coal Tar Deep Hydro-Upgrading on a Pilot Plant Trickle Bed Reactor

Hydrotreatment of model compounds with catalysts of NiW/Al2O3 and NiWP/Al2O3 to simulate low temperature coal tar oil

Mild Hydrotreatment of Low Temperature Coal Tar Distillate: Product Composition

Of Model Compounds with Catalysts of NiW / Al 2 O 3 and NiWP / Al 2 O 3 to Simulate Low Temperature Coal Tar Oil

Kinetic Study of Hydrodesulfurization of Coker Gas Oil in a Slurry Reactor

Combined Process of Hydrocracking and Hydrofining of Coal Tar

Hydrogenation of coal tar on NiMoP/γ-Al2 O3 catalyst

The Rate-Limiting Step in the Integrated Coal Tar Decomposition and Upgrading-Iron Ore Reduction Reaction Determined by Kinetic Analysis

Highly efficiency H 2 production for real coal tar steam reforming over Ni-ca/H-Al catalyst: Effects of oxygen vacancy, CaO doping and synthesis methods

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Integrated Process of Coal Fast Pyrolysis in a Fluidized Bed Reactor with Reforming Reaction of Simulated Fuel Gas to Promote Light Tar Evolution

Experimental Study and Modeling of Heavy Tar Steam Reforming

Kinetic Model and CFD Simulation for an Entrained Flow Coal Hydrogasifier and Influence of Structural Parameters

Preparation of highly dispersed lignite-char-supported cobalt catalyst for stably steam reforming of biomass tar at low temperature

Optimal Fe/Ni/ Ca‐Al catalyst for tar model steam reforming by using the Taguchi method

Assessing the Performance of an Industrial SBCR for Fischer–Tropsch Synthesis: Experimental and Modeling

Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Preparation and catalytic cracking characteristics of coal tar cracking catalyst