Abstract:In this paper, a novel profiling method, Laser Confocal Feedback Profilometery (LCFP), combining quasi-common-path heterodyne phase detection with laser confocal feedback technology, is proposed. A microchip Nd:YAG laser emits 1064nm laser, which passes through a pinhole and frequency shifter, and is focused onto the sample surface. The reflected light is coupled back to the microchip laser cavity and forms the frequency shifted feedback light, causing the laser intensity modulation. When the sample is scanned laterally, its surface height variation changes both the Phase and strength of the feedback light. LCFP then extracts both the amplitude and phase information out of the laser intensity modulation to determine the integral and fractional number of half laser wavelengths contained in the height variation of two points on the sample surface. LCFP can thus overcome the half-laser-wavelength limit of phase measurement in the axial direction. The high sensitivity of microchip laser to feedback light makes LCFP able to measure samples with very low reflectivity. The LCFP experimental setup is built, and it has successfully measured the height of the stages on a glass-substrate grating. The current performances of LCFP are as followed: the axial resolution is better than 2nm, the axial range about 5 mu m, and the detectable reflectivity as low as 10(-9). Due to its direct traceability to laser wavelength, LCFP can potentially be used as the metrology standard of small-scale features.

Laser Thermal Distortion All-Time Metrology System for Solid-State Laser Based on Phase Measuring Deflectometry

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

High-precision laser alignment technique based on spiral phase plate

Small angle measurement method based on the total internal multi-reflection

A Novel Method to Simultaneously Measure the Straightness

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Spatial-Temporal Distortions And Calibration Of Ultrashort Pulses In Complex Optical Systems

Melt Level Measurement for the CZ Crystal Growth Using an Improved Laser Triangulation System

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

A novel measurement system for silicon melt level in Czochralski crystal pullers based on laser triangulation

Development of a Novel Multi-Line Laser Triangulation Scanning System Based on the Rotary Diffraction Grating

Optical System for Scanning Angle Amplification in Tunable Laser Based All-Solid Lidar

Surface Shape Distortion Online Measurement Method for Compact Laser Cavities Based on Phase Measuring Deflectometry

Green Laser Interferometric Metrology System with Sub-Nanometer Periodic Nonlinearity

Laser Rods Wavefront Distortion Testing Instrument

Full Path Compensation Laser Feedback Interferometry for Remote Sensing with Recovered Nanometer Resolutions.

Frequency-Shifted Optical Feedback Measurement Technologies Using a Solid-State Microchip Laser

Laser Confocal Feedback Profilometry

Simulation and analysis of the thermal aberration dynamic compensation based on the cascaded multi-crystal system (CMCS)

Highly Adaptive Single-Shot Surface Shape Distortion Measurement Method for High-Power Lasers

Polarized-Light Difference Method and Equipment for High-Precisely Measuring Star Sensor Bracket Thermal Deformation Based on Laser Autocollimation