Abstract:Optical and laser crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core, which severely affects optical, thermal and mechanical properties of the material. The main purpose of this paper is to study the inclusion mechanisms and to minimize such defects. Two types of mechanisms possibly responsible for inclusion defects are presented. In the current investigation, Czochralski grown optical single crystals are examined to recognize the effects of crystal rotation and natural convection on the melt flow pattern and solidification interface shape. It is established that increasing the rotation rate of crystal or reducing natural convection in the melt will cause the solid-liquid interface change from the convex shape to concave and high concentration of the species may be pushed away from the solidification interface. Simulations were performed to establish the relationships between Gr/Re-2 and growth interface shape change, and between Gr/Re-2 and stagnant point location were established. A disk submerged into the melt was used to reduce natural convection by reducing the melt height. The idea was similar to the submerged baffle or submerged heater used in Bridgeman crystal growth. The effect of submerged baffle on enhancement of crystal rotation effect was demonstrated. Simulation results showed that the melt flow near the solidification interface depended strongly on the baffle location, which was not surprised. The idea of submerged heater was also examined in Czochralski growth. Different from a constant temperature close to the melting temperature used in Bridgman growth, the submerged heater temperature should be selected on a higher temperature between the melting temperature and crucible temperature. The value depended strongly on the ratio between crystal and crucible diameters. It was proved that a constant temperature was not the best choice in Czochralski growth. In fact, an optimized temperature profile could be found in numerical simulations for melt flow control and inclusion suppression.

Melt Level Measurement for the CZ Crystal Growth Using an Improved Laser Triangulation System

A novel measurement system for silicon melt level in Czochralski crystal pullers based on laser triangulation

A laser interferometric measurement on the melt film thickness during close-contact melting on an isothermally-heated horizontal plate

A New Optical Angle Measurement and Compensation

Method for measuring the laser damage threshold of crystal

The realization of a laser on-line measuring system for determining diameters of high-temperature melts

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

A High-Precision Laser Displacement Measurement System

Precise Measuring of Crystals by X-Ray Laser Apparatus Interference

Accurate Characterization of the Properties of the Rare-Earth-Doped Crystal for Laser Cooling

Fiber-coupled Chromatic Confocal 3D Measurement System and Comparative Study of Spectral Data Processing Algorithms

Stability research of laser confocal probe for measuring the micro-shpere

Real-time measurement method of melt pool temperature in the directed energy deposition process

In-process measurement of melt pool cross-sectional geometry and grain orientation in a laser directed energy deposition additive manufacturing process

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Multi-sensor monitoring of powder melting states via melt pool optical emission signals during laser-based powder bed fusion

Sphericity measurement and evaluation for laser fusion target

Study of Melt Convection and Interface Shape During Sapphire Crystal Growth by Czochralski Method

Improving the Measurement Accuracy of Refractive Index of GaAs and Sapphire Crystal by Laser Feedback Interferometry

Interface diagnostics: In-situ determination of crystal-melt interface shape evolutions via probing growth interface electromotive force