Abstract:The virtual absence of pressure driven flow inside an elastohydrodynamic lubrication (EHL) contact leads to remarkable similarity between lubricated film thickness and separation by a viscoelastic layer as is suggested by experimental and theoretical results, see [1]. This offers interesting opportunities for mixed lubrication modeling without needing the flow continuity-based Reynolds equation. In this paper numerical simulation of viscoelastic concentrated contact modeling is revisited, first considering the problem of a viscoelastic half-space and a rigid sphere, both in static (squeeze) as well as (frictionless) rolling/sliding conditions. In particular modeling aspects are discussed so that the efficiency of computation of the viscoelastic deformation remains close to the efficiency of computation of an elastic deformation. This is achieved by rewriting Hunter's [2] deformation equation from an integral form into a differential form by applying the Leibnitz integral theorem, even for complex materials with multiple relaxation times to represent complex viscoelastic properties of materials. The approach can be straightforwardly implemented in any (EHL) contact solver regardless of the numerical method. Detailed results are presented, such as the effect of the Deborah number, the relation between the extreme cases of the rolling problem and the static problem, and discussed in detail. In addition to the rigid sphere against a viscoelastic half-space, also the case of two viscoelastic bodies is considered.

EHL Film Formation under Zero Entrainment Velocity Condition

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

Solution Agreement Between Dry Contacts and Lubrication System at Ultra-Low Speed

Effects of boundary slips on thermal elastohydrodynamic lubrication under pure rolling and opposite sliding contacts

Numerical simulations of lubricated contact - Effects of variation of entraining velocity

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts

A Lubrication Deviation from the Classical EHL Theory by the Lubricant Viscoplasticity: Part II — Boundary of Lubrication Regimes

Study of Transition from Full-film to Boundary Lubrication

Lubrication Force Saturation Matters for the Critical Separation Size of the Non-Colloidal Spherical Particle in the Deterministic Lateral Displacement Device

Molecular Dynamics Simulation of Ultra-Thin Lubricating Films

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

A Lubrication Deviation From the Classical EHL Theory by the Lubricant Viscoplasticity: Part I - Film Thickness Dependence

Lubrication Of Nonconformal Contacts

Thin Film Lubrication. Part I. Study on the Transition Between EHL and Thin Film Lubrication Using a Relative Optical Interference Intensity Technique

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

The Relation and Transition Between EHL and Thin Film Lubrication