Abstract:The effect of injector configurations on combustion and emissions is investigated at low-load conditions in a gasoline direct-injection compression ignition engine. A total of five injectors with higher number of nozzle holes (10, 14) and narrow injection angles (70°, 100°) were tested while comparing with the baseline injector with eight holes and injection angle of 146°. Diesel combustion was also performed at similar operating conditions for the comparison with gasoline combustion. First, at the idle operation (engine speed = 800 r/min, engine load = 10%), combustion stability was very low with baseline injector due to the excessive mixing process. The narrow injection angle was helpful to enhance combustion stability, attributed to suppressing the formation of over-lean mixture by the fuel stratification within narrow area. However, higher number of nozzle holes were unfavorable with frequent misfires by excessive fuel/air mixing. Second, at the low-load operation (engine speed = 1200 r/min, engine load = 25%), combustion and emissions were investigated according to the injection timing. For all injectors, partially premixed compression ignition combustion was realized with early injection which exhibited low nitrogen oxide emissions resulted from lean premixed combustion. However, high hydrocarbon and carbon monoxide emissions were produced with wide injection angle due to the over-mixing and trapped fuel in squish and crevice volume. Hydrocarbon and carbon monoxide emissions were significantly reduced with narrow injection angle, attributed to the fuel stratification inside piston bowl. On the other hand, hydrocarbon and smoke emissions were aggravated in diesel combustion with narrow injection angle, attributed to fuel-rich mixture resulted from the significant fuel impingement on piston bowl. Fuel impingement occurred for both gasoline and diesel; however, evaporation process was much slower for diesel fuel due to the lower volatility. Significant pool fire and rich combustion were observed for diesel combustion, while blue chemiluminescence was dominated in gasoline combustion which meant well-premixed combustion.

Trade-off on fuel economy, knock, and combustion stability for a stratified flame-ignited gasoline engine

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Numerical investigation of the effect of fuel concentration stratification on gasoline compression ignition combustion under low-to-medium load conditions

Optimizing Charge Stratification in a Lean-Burn Spark Ignition Engine

Effect of Injection Modes on Direct Injection Gasoline Stratified Combustion

Effect of injector configurations on combustion and emissions in a gasoline direct-injection compression ignition engine under low-load conditions

Experimental Study of Stratified Lean Burn Characteristics on a Dual Injection Gasoline Engine

Dual-Injection As a Knock Mitigation Strategy Using Pure Ethanol and Methanol

An Experimental Study of Dieseline Combustion in a Direct Injection Engine

Influences of Fuel Injection Strategies on Combustion Performance and Regular/irregular Emissions in a Turbocharged Gasoline Direct Injection Engine: Commercial Gasoline Versus Multi-Components Gasoline Surrogates

Effects of PFI/DI Injection on Stratified Flame Ignition SI-CAIHybrid Combustion

Effect of Fuel Injection Timings and Hydrogen Fraction on Combustion Characteristics of Direct-Injection Engine

In-Cylinder Mixture Distribution Research of Stratified Lean-Burn Strategy and Stratified Stoichiometric Strategy in a GDI Engine Using Laser-Induced Fluorescence

Fuel design and management for the control of advanced compression-ignition combustion modes

Influence of Fuel Injection Timing on Combustion and Emission in Direct Injection Natural Gas Engine

Effects Of Injection Timing Of Dme On Micro Flame Ignition (Mfi) Combustion In A Gasoline Engine

Experimental Research on Knocking Suppression Using Stratified Stoichiometric Mixture in a GDI Engine

Effects of spark ignition and stratified charge on gasoline HCCI combustion with direct injection

The Impact of Fuel and Injection Strategy on Combustion Characteristics, Emissions and Efficiency in Gasoline Compression Ignition Operation

Numerical Investigations of Injection Timing Effects on a Gasoline Direct Injection Engine Performance: Part A, In-Cylinder Combustion Process