Abstract:HCCI combustion was studied in a 4-stroke gasoline engine with a direct injection system. The electronically controlled two-stage gasoline injection and spark ignition system were adopted to control the mixture formation, ignition timing and combustion rate in HCCI engine. The engine could be operated in HCCI combustion mode in a range of load from 1 to 5 bar IMEP and operated in SI combustion mode up to load of 8 bar IMEP. The HCCI combustion characteristics were investigated under different A/F ratios, engine speeds, starts of injection, as well as spark ignition enabled or not. The test results reveal the HCCI combustion features as a high-pressure gradient after ignition and has advantages in high thermal efficiency and low NOx emissions over SI combustion. At the part load of 1400rpm and IMEP of 3.5bar, ISFC in HCCI mode is 25% lower and NOx emissions is 95% lower than that in SI mode. By introducing the second fuel injection in compression stroke, the stratified concentration is formed and the mixture is cooled, which means that HCCI ignition timing can be controlled and the load range can be extended by tuning mixture concentration and temperature. At critical ignition temperature, especially in SI/HCCI combustion mode transition, assisted spark ignition improves the stability of HCCI combustion. To better understand the physicochemical process within the cylinder, direct photographs on an optical engine using CCD camera had been used to analysis the intake, two-stage spray, compression and combustion process of the HCCI engine. The captured photographs show homogeneous lean charge could be realized by single fuel injection in intake stroke. Due to the intake swirl and squish flow during the compression stroke, the rich mixture formed by 2nd fuel spray are located near the spark. A great amount of spots are ignited simultaneously in fuel-rich zone, then it worked as an initiation to ignite the surrounding lean mixture zone. In this combustion system, a high intake swirl can be kept in the toroidal combustion chamber promoting fuel dispersion to reduce NOx emissions. Copyright © 2005 SAE International.

Effects of PFI/DI Injection on Stratified Flame Ignition SI-CAIHybrid Combustion

Effect analysis of the forward flow fuel injection angle on stratified combustion process in a high-pressure direct injection diesel Wankel engine (HPDI-DWE)

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical investigation of the effect of fuel concentration stratification on gasoline compression ignition combustion under low-to-medium load conditions

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

CFD analysis of hydrogen mixing and combustion in internal combustion engine: Evaluation of premixed and DI methods

Effects of spark ignition and stratified charge on gasoline HCCI combustion with direct injection

Effects of different injection strategies on mixing, combustion and emission behavior of gasoline compression ignition (GCI) engines

Controlled Ssci with Moderate End-Gas Auto-Ignition for Fuel Economy Improvement and Knock Suppression

In-Cylinder Mixture Distribution Research of Stratified Lean-Burn Strategy and Stratified Stoichiometric Strategy in a GDI Engine Using Laser-Induced Fluorescence

Study of the Effect of Spark Ignition on Gasoline HCCI Combustion

An Experimental Study on SICI Combustion in Gasoline Direct Injection Engine with Variable Valve Timing

Effect of multi-injection strategy on characteristics of methanol-fueled direct injection spark ignition engine

Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions

Effects of spark ignition on HCCI combustion in gasoline direct-injection engines

Numerical Investigations of Injection Timing Effects on a Gasoline Direct Injection Engine Performance: Part A, In-Cylinder Combustion Process

A Study on the In-Port Twice Fuel Injection Mode in a 5-Valve S.I.Engine

Combustion performance of 2,5-dimethylfuran blends using dual-injection compared to direct-injection in a SI engine

Dual-injection: the Flexible, Bi-Fuel Concept for Spark-Ignition Engines Fuelled with Various Gasoline and Biofuel Blends

A Study on Combustion Characteristics of a High Compression Ratio SI Engine with High Pressure Gasoline Injection

Effects of intake conditions on a dual-fuel spark-assisted compression ignition engine with polyoxymethylene dimethyl ether and methanol as fuels