Abstract:Numerous combustion strategies have been suggested for compression ignition engines in order to meet the stringent emission regulations with minimal sacrifice in the fuel economy. Premixed charge compression ignition combustion has the potential to reduce the nitrogen oxide emissions and the soot emissions while maintaining a high thermal efficiency and has become the research focus recently. Experiments and simulations were used to study the effects of the injection mode and the injection timing on the premixed charge compression ignition combustion and the emissions in a heavy-duty diesel engine at low and medium loads. The results reveal the following. At low loads, when the injection timing of a single injection is 35° crank angle before top dead centre because of the impinging position of the spray, the mixture is divided into two parts: the fuel above the chamber and the fuel in the piston bowl. This helps to utilize fully the in-cylinder air to form a homogeneous mixture. Also the nitrogen oxide emissions are the lowest. At medium loads, with a single injection, the injection mass is increased, the injection duration is prolonged and the mixing timing is reduced. As a result, the soot emissions, the carbon monoxide emissions and the unburned hydrocarbon emissions are increased dramatically; the best emissions are gained at an injection timing of 35° crank angle before top dead centre owing to the combined effect of the optimized mixing time and the optimized mixing space. At medium loads, with multiple injections, the injection mass is divided into four pulses, the mixing timings of which are all increased. The mixing space of the fuel–air mixture is also improved, and a more homogeneous mixture is obtained, which is beneficial to decreasing the soot emissions, the carbon monoxide emissions and the unburned hydrocarbon emissions in comparison with those for the single-injection case. When the injection timings of multiple injections are 80° crank angle before top dead centre, 65° crank angle before top dead centre, 50° crank angle before top dead centre and 35° crank angle before top dead centre, the best trade-off between the performance and the emissions can be achieved at medium loads.

Injection Strategy Optimization for a Multiple Premixed Compression Ignition Engine Based on Taguchi Method

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

A Methodology for Regulating Fuel Stratification and Improving Fuel Economy of GCI Mode Via Double Main-Injection Strategy

Investigation of Two-Stage Split-Injection Strategies for a Dieseline Fuelled PPCI Engine

Interactive Effect and Prediction of Premixed Strategies and Operating Parameters on the Performance of Diesel-E85 Intelligent Charge Compression Ignition (ICCI) Engine Using Taguchi Method

A Methodology for Stratified-Charge Preparation Via Low-Reactivity Fuel Multi-Injection Strategy in Intelligent Charge Compression Ignition (ICCI) Mode

Characterizing the Role of Fuel Injection Strategies on Performance, Combustion, and Emissions in Intelligent Charge Compression Ignition (ICCI) Mode

Towards High Efficiency of Intelligent Charge Compression Ignition (ICCI) Engine by Optimizing the High-Reactivity Fuel Injection Strategies under Medium–high Loads

Investigations of split injection strategies for the improvement of combustion and soot emissions characteristics based on the two-color method in a heavy-duty diesel engine

Effects of the Injection Parameters on the Premixed Charge Compression Ignition Combustion and the Emissions in A Heavy-Duty Diesel Engine

Effect of Injection Timing on PPCI and MPCI Mode Fueled with Straight-Run Naphtha

Investigation of Injection Parameters Coupled with Fuel Reactivity on Combustion and Emissions in Dual Direct-Injection GCI Engine

Effect of Injection Strategy on Emission Characteristics of Compression Ignition Engine Fueled with Blended Fuel

Cfd Investigation Into Diesel Pcci Combustion With Optimized Fuel Injection

Control of Ignition Timing and Combustion Phase by Means of Injection Strategy for Jet-Controlled Compression Ignition Mode in a Light Duty Diesel Engine

Fuel Octane Effects on Gasoline Multiple Premixed Compression Ignition (MPCI) Mode

Comprehensive optimization of a diesel-E85 engine over the full operating range using the Taguchi method in intelligent charge compression ignition (ICCI) mode

Effects of different injection strategies on mixing, combustion and emission behavior of gasoline compression ignition (GCI) engines

A full-parameter computational optimization of both injection parameters and injector layouts for a methanol/diesel dual-fuel direct injection compression ignition engine

Comparative Study of Low Octane Gasoline Multiple Premixed Compression Ignition and Conventional Diesel Combustion

Effects of Split Injection Strategy on the Combustion, Emission and Economic Performance of the Low-Octane Gasoline Fueled MPCI Engines