Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Application of Response Surface Methodology for the Joint Optimization of Performance and Emission Characteristics of a Diesel Engine

Optimization of Injection Parameters for Diesel Engine during Transient Process Based on Response Surface Method and Genetic Algorithm

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

The improvements of combustion and emission for a diesel-biodiesel hybrid engines based on response surface methodology

Multi-Parameter and Multi-Object Optimization on Combustion System of High Power Diesel Engine Based on Response Surface Method

Multi-Objective Optimization Study of Dual-Fuel Engine Emissions and Economy

Numerical Study on the Effects of Multiple-Injection Coupled with EGR on Combustion and NOx Emissions in a Marine Diesel Engine

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

Diesel Engine Performance and Emission Parameters Optimization Using Taguchi and Response Surface Methodology

Multi-objective Optimization of Emission Parameters of a Diesel Engine Using Oxygenated Fuel and Pilot Injection Strategy Based on RSM-NSGA III

Experimental study of multiple injections and coupling effects of multi-injection and EGR in a HD diesel engine

Study on the combustion and emission characteristics of a diesel engine with multi-injection modes based on experimental investigation and computational fluid dynamics modelling

Multi-Optimization of Injection Parameters Affecting Emissions in a Diesel Engine Fueled with Fischer–Tropsch Fuel Based on NSGA-II

Combined Effects of Pilot Quantity, Injection Pressure and Dwell Periods on the Combustion and Emissions Behaviour of a Modern V6 Diesel Engine

Effects of different injection timing on the performance, combustion and emission characteristics of diesel/ethanol/n-butanol blended diesel engine based on multi-objective optimization theory

Experimental Study of the Influence of Multi-Injection Coupled with EGR on Diesel Performance and Emissions

Emission and Performance Optimization of Marine Four-Stroke Dual-Fuel Engine Based on Response Surface Methodology

Simulation research on emissions performance of pilot-injection based on electronically controlled common-rail diesel engine

Multi-objective Optimization of Dual-Fuel Engine Performance in PPCI Mode Based on Preference Decision

Mechanism of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine

Optimization methodology combining Taguchi design and response surface method to maximize a compression ignition engine efficiency fueled with oxygenated synthetic fuel